Lcd Display - Sony PMW-EX30 Operating Instructions Manual

B Video/audio input selection
section
VIDEO INPUT
iLINK
HD SDI
SG
AUDIO INPUT
ANALOG
HD SDI
CH-1/2
HD SDI
CH-3/4
a VIDEO INPUT switch
Use this switch to select the video signal to
record.
i.LINK: To record HDV-format signals
input to the HDV/DV connector
HD SDI: To record HDSDI signals input to
the HD SDI connector
SG: Internal test signal (100% full color
bar)
b AUDIO INPUT switch
When the VIDEO INPUT switch is set to
HD SDI or SG, use this switch to select the
audio signal to record.
ANALOG: To record analog audio signals
input to the AUDIO INPUT CH-1 and
CH-2 connectors
HD SDI CH-1/2: To record channels 1 and
2 of digital audio signals embedded in
the HDSDI signals input to the HD
SDI INPUT connector
HD SDI CH-3/4: To record channels 3 and
4 of digital audio signals embedded in
the HDSDI signals input to the HD
SDI INPUT connector
C LCD display
Displays recording, E-E, and playback
pictures, the menu (see page 83), status
screens (see page 80), and a thumbnail
screen (see page 53).
18 Names and Functions of Parts
1 VIDEO INPUT switch
2 AUDIO INPUT switch
Pressing the DISPLAY button to enable
superimposition provides text information
shown in the following figure on recording,
E-E, and playback pictures. Alarm/error
messages and notice/confirmation
messages (shown in 7 and 0) are
displayed, if required, regardless of the
DISPLAY button status.
Those information can be superimposed on
the output signals (see page 46) from the
HDMI, COMPONENT, COMPOSITE, S-
VIDEO, and HD/SD SDI OUTPUT
connectors so that you can check them on
the external monitor screen.
In Chapter 2 and following of this manual,
both the LCD display of this unit and an
external monitor screen are referred to
collectively as the "monitor screen".