Table of Contents
Advertisement
6.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
To Disable Password
1.
Choose the Set Password option from the CMOS Setup Utility
main menu and press <Enter>.
2.
When you see "Enter Password," enter the existing password and
press <Enter>.
3.
You will see "Confirm Password." Type it again, and press
<Enter>.
4.
Select Set Password again, and at the "Enter Password" prompt,
don't enter anything; just press <Enter>.
5.
At the "Confirm Password" prompt, again don't type in anything;
just press <Enter>.
6.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
4.2.12 Save & Exit Setup
PCI-6886 User's Manual
Figure 4.12: Save to CMOS and EXIT
40
Advertisement
Table of Contents
