Table of Contents
Advertisement
1.
Choose the Set Password option from the CMOS Setup Utility
main menu and press <Enter>.
2.
When you see "Enter Password," enter the desired password and
press <Enter>.
3.
At the "Confirm Password" prompt, retype the desired password,
then press <Enter>.
4.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
To Change Password
1.
Choose the Set Password option from the CMOS Setup Utility
main menu and press <Enter>.
2.
When you see "Enter Password," enter the existing password and
press <Enter>.
3.
You will see "Confirm Password." Type it again, and press
<Enter>.
4.
Select Set Password again, and at the "Enter Password" prompt,
enter the new password and press <Enter>.
5.
At the "Confirm Password" prompt, retype the new password, and
press <Enter>.
Figure 4.11: Set password
39
Advertisement
Table of Contents
