NordicTrack V-FLEX NTPRSY3415.0 User Manual page 13

24. Attach the Seat (19) and the Seat Base (91) to
the Seat Frame (6) with two M6 x 25mm Screws
(60), an M6 x 87mm Screw (68), and an M6
Washer (78).
Hook the Seat Frame (6) onto the Upright (3) at
the indicated location.
25. Attach the Bumper (49) to the Leg Lever (7) with
an M4 x 16mm Screw (70).
Apply grease to an M10 x 71mm Bolt (67). Attach
the Leg Lever (7) to the Seat Frame (6) with the
Bolt and an M10 Nylon Locknut (73). Do not
overtighten the Bolt; the Leg Lever must be
able to pivot easily.
26. Slide two Foam Pads (21) onto the Seat Frame
(6).
Slide a Pad Tube (20) through a hole in the Leg
Lever (7). Slide two Foam Pads (21) onto the Pad
Tube.
27. Slide an Arm Pad Base (83) and an Arm Pad (84)
onto the VKR Frame (82). Attach the Arm Pad
Base and the Arm Pad with two M6 x 73mm
Screws (103) and two M6 Washers (78). Next,
apply soapy water to the inside of the Short VKR
Handgrip (110), and slide the Short VKR
Handgrip onto the VKR Frame.
Repeat this step on the other side of the VKR
Frame (82).
24
19
91
6
78
68
25
Grease
6
67
73
7
26
21
21
20
27
13
3
60
70
49
6
21
7
21
110
84
83
103
78
103
82