Optional Drawer - Kyocera Mita KM-1500 Service Manual

Maintenance
item No.
U402 Adjusting margins of image printing
Adjustment
See page 1-6-43.
U403 Adjusting margins for scanning an original on the contact glass
Adjustment
See page 1-6-49.
U404 Adjusting margins for scanning an original from the DP
Adjustment
See page 1-6-54.
U901 Checking/clearing copy counts by paper feed locations
Description
Displays or clears copy counts by paper feed locations.
Purpose
To check the time to replace consumable parts. Also to clear the counts after replacing the consumable parts.
Method
1. Press the start key.
2. Select the paper feed location (group No.) for which the count is to be checked or cleared by lighting image
mode LEDs using the image mode selection key.
3. Change the indication of the copy quantity display by lighting a copy exposure indicator using the copy
exposure adjustment keys.
Image mode LED
(group No.)
1
2
3
4
: Off, : On
Note: When no optional paper feed device is installed, the counts corresponding to optional paper feed
devices will not appear.
Clearing copy counts by paper feed locations
1. Select the paper feed location to clear the count.
2. Light exp. 3 using the copy exposure adjustment key.
3. Press the start key. The count is cleared.
Clearing copy counts for all paper feed locations
1. Select group 4.
2. Press the start key. The counts are cleared.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Description
Copy exposure
Copy quantity display (count value)
indicator
Exp. 1 First 3 digits of bypass copy count
Exp. 2 Last 3 digits of bypass copy count
Exp. 3 Clearing the count (CLE)
Exp. 1 First 3 digits of the drawer copy count
Exp. 2 Last 3 digits of the drawer copy count
Exp. 3 Clearing the count (CLE)
Exp. 1 First 3 digits of the optional drawer copy count
Exp. 2 Last 3 digits of the optional drawer copy count
Exp. 3 Clearing the count (CLE)
Exp. 1 Clearing all counts (CLE)
2DC
1-4-25