Phonic AM440 User Manual
Hide thumbs
Also See for AM440:
- User manual (28 pages) ,
- User manual (20 pages) ,
- User manual (28 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Phonic AM440
Summary of Contents for Phonic AM440
-
Page 2: Important Safety Instructions
AM440/440D... -
Page 3: Table Of Contents
CONTROLS AND SETTINGS .....................8 APPLICATION .......................... 12 DIMENSIONS........................... 13 DIGITAL EFFECT TABLE......................14 SPECIFICATIONS........................15 BLOCK DIAGRAMS ......................... 17 Phonic reserves the right to improve or alter any information suppied within this document without prior notice. V1.1 APR 12, 2006 AM440/440D... -
Page 5: Getting Started
Set the gain so the Level Meter indicates the au- dio level is around 0 dB. stop making the audio signal. You can repeat the same process for other chan- nels. Or not, it’s your call. AM440/440D... -
Page 6: Making Connections
The signal sent from these out- balanced or unbalanced signals. There are various puts is fed from the AUX send control on the AM440 numbers of these inputs depending which mixer you and the Digital Effect Processor on the AM440D. -
Page 8: Controls And Settings
This control is used to give a shelving boost or cut of ±15 dB to high frequency (12 kHz) sounds. This will adjust the amount of treble included in the au- dio of the channel, adding strength and crispness to sounds such as guitars, cymbals, and synthesizers. AM440/440D... - Page 9 19. Peak Indicator 17. AUX / EFX Control The AUX control on the AM440 allows the user to This LED indicator will illuminate when the device hits high peaks, 6 dB before overload occurs. It is send the corresponding signal to the AUX mixing best to adjust the gain of the channel so that the PEAK indicator lights up on intervals only, if at all.
-
Page 10: Digital Effect Section
Main left and right mixing bus to be applied to your main feed. 26. EFX “to Ctrl” Button This button is pushed to allow the signal from the Digital Effect processor to be sent to the Control Room outputs for monitoring purposes. AM440/440D... -
Page 11: Master Section
“to Ctrl Rm” sends the signal to the Control Room mixing bus for monitoring. 30. AUX “to Ctrl” Button (AM440 only) When this button is activated, the AUX send signal (the level of which is decided by the AUX send con- trol) will be sent to the Control Room mixing bus for monitoring purposes. -
Page 12: Application
Combining the use of different instruments with the mixer’s special functions (such as digital effect processing, in the case of the AM440D) will ensure that your audio sounds exactly the way you want it. AM440/440D... -
Page 13: Dimensions
DIMENSIONS Both the AM440 and AM440D share the same dimensions. * All measurements are shown in mm/inches. AM440/440D... -
Page 14: Digital Effect Table
100mS - 2.7S HEAVY PHASER 1 TAP DELAY 100mS - 2.7S HEAVY PHASER 2 TEST TONE FREQUENCY SHAPE WILD PHASER 1 LOW FREQUENCY 100Hz SINEWAVE WILD PHASER 2 MID FREQUENCY 1kHz SINEWAVE HIGH FREQUENCY 10kHz SINEWAVE PINK NOISE 20Hz~20kHz AM440/440D... - Page 16 100VAC, 120VAC, supply, depends on region) 220~240VAC, 50/60Hz 220~240VAC, 50/60Hz Weight 1.7kg (3.75 lbs) 1.72 kg (3.78 lbs) Dimensions (WxHxD) 242 x 55 x 225mm 242 x 55 x 225mm (9.5” x 2.16” x 8.86”) (9.5” x 2.16” x 8.86”) AM440/440D...
- Page 20 AM440/440D...