Table of Contents
Advertisement
Users Manual
General Preferences
While you are setting up RHAON's Preferences, you can click on the General tab to review the program's default settings and change
them if necessary. We already discussed the selection of a Networking Adapter (aka NIC) in the Connect section of this manual. Unless
you are a networking expert you should leave the default settings under SNMP (Simple Network Management Protocol) Variable
Retrieval alone: SNMP is not as simple as its name implies. IP Addressing is also covered in the Connect section of this manual. After
your network is set up and operating there should be no reason to change these settings.
Change the units of temperature (Fahrenheit or Centigrade) to ones that are most useful to you and your fellow operators.
Under Group Settings, you can set up a Power On Sequencing Delay for all grouped loudspeakers. This will help avoid a voltage surge
that can trip building circuit breakers. Depending on the delay interval you select, there will be a .5, 1.0, 1.5 or 2.0 millisecond turn-on
delay between each amplifier in the Group.
30
Advertisement
Table of Contents
