Setting Keypad Illumination; Activating/Deactivating Auto Answer; Changing The Speaker/Earpiece Volume - Gigaset S810 Manual

Briefly press the end call key a to return to
the idle display.
Please note
If the analogue clock has been set as the
screensaver, the second hand is shown
only when the handset is in the base.
Setting large font
You can increase the font size of print and
symbols in call lists and in the directory to
improve readability. Only one entry is shown
at a time on the display instead of several
entries and names are abbreviated if neces-
sary.
Ï
¢ ¢
v
Display + Keypad
¢
Large Font
§Change§
Press display key (³= on).
Setting the colour scheme
You can set the display to be shown in vari-
ous colour combinations.
Ï
¢ ¢
v
Display + Keypad
¢
Colour Schemes
Select Colour Scheme (1 to 5) and press
•
Setting the display Backlight
Depending on whether or not the handset is
in the base/charger, you can activate or
deactivate the backlight. If it is activated, the
display is permanently dimmed. If the back-
light is deactivated it is switched on by
pressing any key. Digit keys appear on the
display for pre-dialling; all other keys do not
have any further functions.
Ï
¢ ¢
v
Display + Keypad
¢
Display Backlight
The current setting is displayed.
¤
You can enter data in the following fields:
In Charger
Select On or Off.
Out of Charger
Select On or Off.
Please note
With the On setting, the standby time of
the handset can be significantly
reduced.
§Save§

Setting keypad illumination

The brightness of the keypad illumination
can be set to one of five levels.
Ï
¢
v
¢
Keypad Illumination
The current setting is displayed.
¤
You can enter data in the following fields:
Brightness:
Select 1 (darkest) to 5 (brightest).
§Save§
•
Activating/deactivating
auto answer
If you activate this function, when you
receive a call you can simply lift the handset
§OK§
.
out of the base/charger without having to
press the talk key c.
Ï
¢
v
§Change§
Changing the speaker/
earpiece volume
You can set the loudspeaker volume for
handsfree mode and the earpiece volume to
five different levels.
During a conversation via the earpiece or in
handsfree mode:
ø/ ÷
Handset settings
Press the display key.
¢
Display + Keypad
Press the display key.
¢ ¢
Telephony Auto Answer
Press display key (³= on).
Press the side key to call up the
Handset Volume menu.
Change the volume by pressing
ø (louder) or ÷ (quieter).
71