Barco RLM W14 Service Manual page 31

Barco RLM W14 Operation Commands
Command
Operation
Item
0.7 f.search
0.8 sdi.3gccir
0.9 DarkTm.sel
0.10 3dsync.inv
0.11 3dsync.dly
0.12 3dsync.ref
0.13 (Reserve)
0.14 (Reserve)
0.15 (Reserve)
0.16 (Reserve)
REMARK: An input command will get back with "NA" when the input command is "Not Applicable" in
some specific conditions.
Note1: Not applicable in standby mode.
Note2: Not applicable in standby mode or without signal locked.
Note3: Not applicable when
Note4:
Only valid when source is one of Composite, S-Video and RGB-S.
Note5: Native aspect ratio is not applicable when zoom is set to "Zoom", Letterbox aspect ratio is not applicable
when the input format is one of formats as listed in appendix 2.
Note6: election "Zoom" is not applicable when aspect ratio is set to Native.
S
Note7: Only applicable when source is one of RGB D-15, YUV1 and RGBHV/YUV2.
Note8: Not applicable
Note9: pip.sel can NOT be set to 0.
Note10: Not applicable when pip is off.
Note11: Not applicable when lamp is cooling.
Note12: Not applicable when eco.net.pow is on.
Commands
= ?
= ?
= ?
= ?
= ? + -
= ?
(Reserve)
(Reserve)
(Reserve)
(Reserve)
picture mute is on.
when color space is set to custom.
Values
0 = F1 Search
1 = F2 Search (default)
0 = TRS
1 = CCIR
0 = 650 us
1 = 1300 us
2 = 1950 us
0 = Off
1 = On
-32000~32000
0 = Internal
1 = External
(Reserve)
(Reserve)
(Reserve)
(Reserve)
31 of 149
Notes
Note 19
Note 19
Note 19
In microseconds
Note 19
(Reserve)
(Reserve)
(Reserve)
(Reserve)