Table of Contents
Advertisement
H
C
OW TO
ONNECT THE
HOW TO CONNECT THE POWER CORD
This product must be grounded. If it should mal-
function or break down, grounding provides a path of
least resistance for electric current to reduce the risk
of electric shock. Note: These instructions describe
how the power cord should be connected in the
UK, Germany, Italy, Spain, or France. To connect
the power cord in other countries, refer to the
instruction sheet accompanying this manual.
DANGER:
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician. Do not use
an adapter to connect the plug to an improper
receptacle.
This product is
1
for use on a dedi-
cated circuit. In
the UK,
Germany, Italy,
Spain, or
France, use a
dedicated 10-
Bracket
amp, 240-volt
Screws
circuit. No other
appliance should
be on the same
circuit. The product is equipped with a cord having an
equipment-grounding conductor and a grounding plug.
Plug one end of the cord into the INCLINE TRAINER
as shown in drawing 1. Attach the cord bracket over
the cord with the included allen wrench and the two
bracket screws.
Next, plug the grounding plug into a receptacle as
shown in drawing 2 at the right. Do not modify the plug
or the receptacle. Do not use an adapter, a surge pro-
tector, or an extension cord.
I
NCLINE
Improper connection
Cord
Cord
Bracket
IT
T
RAINER
2
Germany
HOW TO CONNECT A CATV CABLE
If your INCLINE TRAINER has the Workout TV con-
sole, a CATV cable must be connected to the IN-
CLINE TRAINER for cable TV stations to be viewed.
Locate the cable
jack on the front of
IT
the INCLINE
TRAINER.
Connect the CATV
cable to the cable
jack using the PAL
adapter. Route the
cable so that it will
not be pinched or
crushed by the wheels when the incline is changed.
GR
A satellite receiver, VCR, or DVD player can also be
connected to the INCLINE TRAINER. Connect a CATV
cable from the coaxial output on your equipment (usu-
ally labeled TV OUT or RF OUT) to the cable jack on
the front of the INCLINE TRAINER.
Note: Audio/video equipment without coaxial outputs
(some satellite receivers and DVD players) requires a RF
modulator to work correctly with the INCLINE TRAINER.
RF modulators are not available from FreeMotion
Fitness, but are available at electronics stores. See the
owner's manual for the equipment you wish to connect to
determine if an RF modulator is needed.
10
France
Spain
GR
UK
UK
GR
IT
FR/SP
Cable Jack
JP
FR/
Italy
IT
Hide quick links:
Advertisement
Table of Contents
