Connecting To A Tv And A Video Recorder; If Your Vcr Does Not Have A Scart Connector; Connecting To An Analogue Satellite Receiver And A Video Recorder - Nokia MEDIAMASTER 9400S Owner's Manual

Connecting to a TV and a Video recorder

Refer to your video recorder manual for full instructions.
Ÿ
Connect one SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
Ÿ
Connect another SCART cable between the VCR and
the AUX SCART socket on the Mediamaster.
Ÿ
Connect the RF cable from the RF output on the VCR
to the TV aerial input on the TV.
Ÿ
Connect the TV aerial to the RF input socket on the VCR.

If Your VCR does not have a SCART connector

Ÿ
Connect a SCART cable between the main SCART
socket on the TV and the TV SCART socket on the
Mediamaster.
Ÿ
Connect an RF cable from the RF output on the VCR to
the TV aerial input on the TV.
Ÿ
Connect an RF cable from the TV/VCR output on the
Mediamaster to the RF input socket on the VCR.
Ÿ
Connect the TV aerial to the TV AERIAL input socket on the Mediamaster.
Connecting to an Analogue satellite receiver and
a Video recorder
Ÿ
Connect a SCART cable between the main
SCART socket on the TV and the TV SCART
socket on the Mediamaster.
Ÿ
Connect a SCART cable between the VCR and the
AUX SCART socket on the Mediamaster.
Ÿ
Connect an RF cable from the RF output on the
VCR to the TV aerial input on the TV.
Ÿ
Connect an RF cable from the RF output on the
Analogue receiver to the RF input socket on the
VCR.
Ÿ
Connect the TV aerial to the RF input socket on the
Analogue receiver.
In order to switch the signal from the dish between the analogue and digital receivers, you need a
Universal Twin LNB.
Ÿ
Cable A between output A on the LNB to the LNB socket on the analogue receiver.
Ÿ
Cable B between output B on the LNB to the ANTENNA socket on the Mediamaster.
Both the VCR and the analogue satellite receiver must be tuned to different UHF channels (than the
Mediamaster) when using RF-connectors.
VCR
Analogue Receiver
GB 7