Table of Contents
Advertisement
Command
Description
Syntax
Arguments
Example
M1112(conf-common)#dhcp address 1 168.190.1.1
255.255.255.0 100
M1112(conf-common)#
Command
Description
Syntax
Arguments
Example
M1112(conf-common)#dhcp dns 1 primary 190.168.2.1
M1112(conf-common)#
C33907001SE_00
Set DHCP address range
You can define to DHCP address ranges with this com-
mand. The default pool is the IP address of the inter-
face with a subnet mask 255.255.255.0.
If you don't define an address range, up to two ranges
will be defined automatically for ETH/VBRIDGE inter-
faces, in this order, if the interface has an IP address.
[no] dhcp address <scope> <pool-base> <pool-mask>
<pool-size>
no switches of address pool.
scope defines the pool. Values are 1 and 2.
pool-base is the first IP address in the pool in dotted
decimal format.
pool-mask is the subnet mask of the pool addresses.
pool-size is the size of the address pool, 0...254.
Set DNS address for DHCP clients
Defines a DNS address for the DHCP clients.
[de | no] dhcp dns <scope> <class> <dns-server>
scope defines the DHCP pool (1 or 2).
class defines whether the server is a primary or a
secondary server.
dns-server is the IP address of the DNS server.
E Copyright Nokia Networks Oy
Managing M1112
5-61
Advertisement
Table of Contents
