Table of Contents
Advertisement
M1112 Administrator Manual
Command
Description
Syntax
Arguments
Example
M1112(conf-common)#ip host-acl 192.168.1.17
255.255.255.0
M1112(conf-common)#
Command
Description
Syntax
Arguments
Example
M1112(conf-common)#dhcp mode server
M1112(conf-common)#
5-60
Define and activate host acces list
You can define up to four IP addresses from which MW
1122 can be accessed using telnet or http. f you define
one or more addresses, M1112 can be accessed from
the specified addresses only.
[no] ip host-acl <ip-address> <ip-mask>
no switches host access list off.
ip-address is the allowed host address and ip-
mask is its subnet mask.
Switch on/off dynamic host configuration protocol
Switches on/off dynamic host configuration protocol.
[no] dhcp mode <service>
no switches off DHCP.
service parameter value is server when you want to
use M1112 as a DHCP server.
E Copyright Nokia Networks Oy
C33907001SE_00
Advertisement
Table of Contents
