Table of Contents
Advertisement
1. Use CLI to issue
install
where
containing the new software and
file
tftp:/<ip-address>/Gx1x2200.R00 image.exe
alternatively.
2. After you will see
message, restart M1112 to activate the new software.
Downloading configuration or application from monitor
Monitor is a small application that is executed before the actual
software image is started. Typically the Monitor automatically loads
the application file image.exe. You can activate the Monitor by
pressing "m" followed by "o" in the very beginning of the system
startup:
local MAC=00:40:43:02:36:72; Using M111/850 eth conf
Type
'm'
activate Monitor
Nokia Networks (C) 1999
Nokia Boot
B-R0.0.0. built on Apr 4 2000 11:27:55
MON>
The following commands are available for file handling in the
Monitor:
D
rename
D
delete
D
dir
M1112 has two methods of retrieving files:
D
TFTP
D
XMODEM
You can retrieve files from a TFTP server using the commands in the
following example:
MON>ipa 192.168.1.1
ip=192.168.1.1
ipserver=0.0.0.0
ipgw=0.0.0.0
serverfile=
MON>ips 192.168.1.100
C33907001SE_00
tftp:/<ip-address>/Gx1x2200.R00
is the IP address of the TFTP server
<ip-address
to
be
downloaded.
transfer status
(fast)
followed
E Copyright Nokia Networks Oy
Managing M1112
is the name of the
Gx1x2200.R00
The
command
SUCCESSFUL
by
'o'
(in
10
command,
copy
can be used
sec)
to
5-7
Advertisement
Table of Contents
