Opening A Connection - Nokia M1112 Administrator's Manual

Adsl (over isdn) router

Hide thumbs Also See for M1112:

Table of Contents

Note

Before using your web browser for configuration, you must know the

IP address or the name assigned to your M1112.

There are three ways to find out whether to use a name or an IP

address:

Your service provider has given you an IP address for M1112.

Your M1112 uses Dynamic Host Configuration Protocol (DHCP)

and Domain Name Server. In this case the name is M1112.

Your M1112 uses DHCP. In this case run winipcfg.exe (Windows

95) or ipconfig.exe (Windows NT). The IP address of M1112 is the

Default Gateway address shown by the ipconfig program.

5.3.1 Opening a connection

To open a connection to the Nokia M1112:

1. Start your web browser.

2. Enter the name ('M1112') or IP address of your Nokia M1112 in

the browser's Open Location field and press Enter. If you use the

IP address, it has to be assigned to a local port or gateway interface

(VBRIDGE).

3. Type in the username/password as requested. If no

username/password is required, just click OK to proceed. The

Nokia M1112 Main Page appears.

C33907001SE_00

E Copyright Nokia Networks Oy

Managing M1112

5-9

Table of Contents