Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Ubiquiti edgepoint r6
Summary of Contents for Ubiquiti edgepoint r6
- Page 1 Intelligent WISP Control with FiberProtect ™ Model: EP-R6...
-
Page 3: Package Contents
Introduction Introduction Thank you for purchasing the Ubiquiti Networks® EdgePoint ™ Router. This Quick Start Guide is designed to guide you through installation and includes the warranty terms. Package Contents EdgePoint Router Metal Strap Gigabit PoE (24V, 1.25A) with Mounting Bracket... -
Page 4: Hardware Overview
EdgePoint EP‑R6 Quick Start Guide Hardware Overview Ports Panel Ground Bonding Point Reset Interface Description Ground Used to secure a ground wire (not included). Bonding Point There are two methods to reset the EP‑R6 to factory defaults: • Runtime reset (recommended) The EP‑R6 should be running after bootup is complete. -
Page 5: Power Options
Hardware Overview Power Options Either the VDC input or PoE input is used at any one time. If both input types are connected, only the input type with the highest voltage will be used; the other can be used as a backup. Any of the input options can power any of the output options. - Page 6 EdgePoint EP‑R6 Quick Start Guide Ports PoE In / eth0 eth1-4 eth5 / SFP Description Interface The RJ45 port supports 10/100/1000 Ethernet connections and has PoE input or output functionality: • PoE Input Accepts 24V, 1.4A PoE input to power the EdgePoint and PoE output. PoE In/eth0 (24V PoE Out) •...
-
Page 7: Front Panel Leds
Hardware Overview Front Panel LEDs State Status Green EdgePoint Powered On No Link Speed/ Link/Act 10/100/1000 Mbps (1 Gbps) Link Green Flashing Indicates Activity No PoE Output Green 24V Passive No Link Speed/ Link/Act 100/1000 Mbps (1 Gbps) Link Green Flashing Indicates Activity... -
Page 8: Hardware Installation
EdgePoint EP‑R6 Quick Start Guide Hardware Installation Pole Mounting 1. Open the Metal Strap and feed it through the mounting slots on the back of the EdgePoint. 2. Wrap the Metal Strap around the pole. Use a 7 mm socket wrench to turn the screw clockwise and securely fasten the strap to the pole. -
Page 9: Removing The Port Cover
Hardware Installation Removing the Port Cover 1. Press down and remove the port cover from the EdgePoint. 2. Depending on which cables will be connected, remove the corresponding cable feed plugs from the port cover. - Page 10 EdgePoint EP‑R6 Quick Start Guide Grounding the EdgePoint Note: The ground wire should be as short as possible and no longer than one meter in length. 1. Remove the grounding screw and secure a ground wire (not included) to the Ground Bonding Point. 2.
-
Page 11: Connecting Ethernet
Connecting Ethernet Connecting Ethernet 1. Connect the Ethernet cables to ports in this range: eth0‑eth4. Note: PoE is disabled by default. 2. You can create a strain relief for any Ethernet cable by feeding a cable tie (not included) through the tie slot under the cable. Then wrap the cable tie around the cable and tighten. - Page 12 EdgePoint EP‑R6 Quick Start Guide Using the SFP Port (Optional) For information about compatible fiber SFP modules, visit: community.ubnt.com/edgemax To use an SFP port: 1. Plug a compatible fiber module into the SFP port. 2. Connect a fiber optic strand to the fiber module.
- Page 13 Using the SFP Port (Optional) 3. Create a strain relief by feeding a cable tie (not included) through the tie slot under the cable. Then wrap the cable tie around the cable and tighten.
-
Page 14: Connecting To Power
EdgePoint EP‑R6 Quick Start Guide Connecting to Power Either the VDC input or PoE input is used at any one time. If both input types are connected, only the input type with the highest voltage will be used; the other can be used as a backup. Follow the appropriate instructions for your installation: Connecting to the 24VDC Input 1. - Page 15 Connecting to Power Connecting Power Using PoE Note: Do NOT configure port eth0 in PoE output mode if you are using it as a PoE input power source. 1. Connect an Ethernet cable to the PoE In / eth0 port of the EdgePoint.
- Page 16 EdgePoint EP‑R6 Quick Start Guide 5. When you are finished, replace the port cover. Optional: You can use an M4x6 set screw (not included) to secure the port cover. Mounting the Gigabit PoE Adapter (Optional) 1. Remove the PoE Mounting Bracket from the adapter, place the bracket at the desired location, and mark the two holes.
- Page 17 Press enter (PC) or return (Mac). 3. The login screen will appear. Enter ubnt in the Username and Password fields. Read the Ubiquiti License Agreement, and check the box next to I agree to the terms of this License Agreement to accept it.
- Page 18 EdgePoint EP‑R6 Quick Start Guide Configuring PoE Settings WARNING: Before activating 24V passive PoE, ensure that the connected device supports PoE and the supplied voltage. 1. Go to Actions > PoE for the interface you want to configure. 2. Select 24V from the PoE drop‑down menu. Note: If the PoE screen states that PoE is not supported, then there is insufficient power.
-
Page 19: Specifications
Specifications Specifications EP‑R6 Dimensions 188.6 x 177.1 x 49.8 mm (7.43 x 6.97 x 1.96") Weight 605 g (1.33 lb) Max. Power Consumption 7W (Excludes PoE Output) Power Input (1) DC Terminal Block or (1) RJ45 (eth0) (Self‑Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs) Power Supply... -
Page 20: Safety Notices
EdgePoint EP‑R6 Quick Start Guide Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. -
Page 21: Limited Warranty
UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS’ sole and... -
Page 22: Limitation Of Liability
OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant that the operation of the Products will be error‑free or that operation will be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance, including coverage, buyer’s selection of products (including the Products) for buyer’s application and/or failure of... -
Page 23: Industry Canada
Compliance Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. -
Page 24: Rohs/Weee Compliance Statement
EdgePoint EP‑R6 Quick Start Guide RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. -
Page 25: Declaration Of Conformity
Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto. Declaration of Conformity Česky UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI NETWORKS zařízení, je ve shod se základními požadavky a dalšími příslušnými ustanoveními směrnice [Czech] 1999/5/ES. -
Page 26: Online Resources
és más vonatkozó 1999/5/EK irányelv [Hungarian] rendelkezéseit. Íslenska Hér, UBIQUITI NETWORKS, því yfir að þetta UBIQUITI NETWORKS tæki er í samræmi við grunnkröfur og önnur viðeigandi ákvæði tilskipun 1999/5/EC. [Icelandic] Italiano [Italian] Con la presente, UBIQUITI NETWORKS, dichiara che questo dispositivo UBIQUITI NETWORKS, è... - Page 28 . u b n t . c o m © 2015‑2016 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, airMAX, EdgeMAX, EdgeOS, EdgePoint, and TOUGHCable are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries.