Citrus Press - Kenwood multipro FP734 Instructions Manual

citrus press

Use the citrus press to
squeeze the juice from
citrus fruits (eg oranges,
lemons, limes and
grapefruits).
cone
sieve
to use the citrus
press
1 Fit the drive shaft and bowl
onto the power unit.
2 Fit the sieve into the bowl -
ensuring the sieve handle is
locked into position directly
over the bowl handle
3 Place the cone over the drive shaft turning until it drops all
the way down .
4 Cut the fruit in half. Then switch on and press the fruit onto
the cone.
The citrus press will not operate if the sieve is
G
not locked correctly.
mini chopper/mill
Use the mini chopper/mill for milling herbs,
nuts and coffee beans.
blade unit
sealing ring
jar
mill lid
safety
Never fit the blade unit to your food
G
processor without the jar fitted.
Never unscrew the jar while the mini
G
chopper/mill is fitted to your appliance.
Do not touch the sharp blades – Keep the
G
blade unit away from children.
Never remove the mini chopper/mill until
G
the blades have completely stopped.
important
To ensure the long life of your mini
G
chopper/mill, never run for longer than 30
seconds. Switch off as soon as you have got
the right consistency.
The processing of spices is not
G
recommended as they may damage the
plastic parts.
The appliance will not work if the mini chopper/mill is
G
incorrectly fitted.
Use for dry ingredients only.
G
m u
lt i
p r
o
.
to use your mini chopper/mill
1 Put your ingredients into the jar.
Fill it no more than half full.
2 Fit the sealing ring into the
blade unit.
3 Turn the blade unit upside
down. Lower it into the jar,
blades down.
4 Screw the blade unit onto the
jar until it is finger tight.
5 Place the mini chopper/mill onto
the power unit and turn to
lock .
6 Switch on to maximum speed or use the pulse control.
hints
Herbs are best milled when clean and dry.
G
mini processor bowl
Use the mini processor
bowl to chop herbs and
process small quantities of
ingredients e.g. meat,
onion, nuts, mayonnaise,
vegetables, purées, sauces
and baby food.
mini processor knife blade
mini processor bowl
to use the mini
processor bowl
1 Fit the drive shaft and bowl
onto the power unit.
2 Fit the mini processor bowl
- ensuring the ribs on the
inside of the mini bowl
chimney align with the slots
in the main bowl chimney
.
3 Place the knife blade over
the drive shaft .
4 Add the ingredients to be
processed.
5 Fit the lid and switch on.
safety
Never remove the lid until the knife blade has completely
G
stopped.
The knife blade is very sharp - always handle with care.
G
important
Don't process spices – they may damage the plastic.
G
Don't process hard food such as coffee beans, ice cubes or
G
chocolate – they may damage the blade.
hints
Herbs are best chopped when clean and dry.
G
Always add a little liquid when blending cooked ingredients
G
to make baby food.
Cut foods such as meat, bread, vegetables into cubes
G
approximately 1-2 cm (
When making mayonnaise add the oil down the feed tube.
G
7
m u
lt i
p ro
m u
lt i
p r
o
1 ⁄ – 3 ⁄ in) before processing.
2 4