Kenwood multipro FP734 Instructions Manual page 8

hints
Best results are obtained when the eggs are at room
G
temperature.
Ensure the bowl and whisks are clean and free from grease
G
before whisking.
maxi-blend canopy
When blending liquids, use the maxi-
blend canopy with the knife blade. It
allows you to increase the liquid
processing capacity from 1 litre to
1.5 litres, prevents leaking and
improves the chopping performance
of the blade.
1 Fit the drive shaft and bowl onto the
power unit.
2 Fit the knife blade.
3 Add ingredients to be processed.
4 Fit the canopy over the top of the
blade ensuring it sits on the ledge
inside the bowl . Do not push down on the
canopy, hold by the centre grip.
5 Fit the lid and switch on.
slicing/shredding discs
reversible slicing/shredding discs - thick
Use the shredding side for cheese,
carrots, potatoes and foods of a
similar texture.
Use the slicing side for cheese,
carrots, potatoes, cabbage,
cucumber, courgette, beetroot and
onions.
fine (Julienne style) chipper
disc
Use to cut: potatoes for Julienne
style French fries; firm ingredients for
salads, garnishes, casseroles and
stir fries (eg carrot, swede,
courgette, cucumber).
rasping disc
Grates Parmesan cheese and
potatoes for German potato dumplings.
safety
Never remove the lid until the cutting disc has
G
completely stopped.
Handle the cutting discs with care - they are
G
extremely sharp.
to use the cutting discs
1 Fit the drive shaft and bowl onto
the power unit.
2 Holding by the centre grip
place the disc onto the drive
shaft with the appropriate side
uppermost
3 Fit the lid.
4 Choose which size feed tube
you want to use. The pusher
contains a smaller feed tube for
processing individual items or
thin ingredients.
To use the small feed tube - first
put the large pusher inside the
feed tube.
To use the large feed tube - use both pushers together.
5 Put the food in the feed tube.
6 Switch on and push down evenly with the pusher - never
m u
lt i
p ro
put your fingers in the feed tube.
hints
Use fresh ingredients
G
Don't cut food too small. Fill the width of the large feed tube
G
fairly full. This prevents the food from slipping sideways
during processing. Alternatively use the small feed tube.
When using the chipper disc, place ingredients horizontally.
G
, thin
When slicing or shredding: food placed upright
G
out shorter than food placed horizontally
There will always be a small amount of waste on the plate or
G
in the bowl after processing.
6
,
.
m u
lt i
p ro
m u
lt i
p ro
comes
.
m u
lt i
p ro