Citrus Press - Kenwood FP120 Manual

using the cutting plates
shredding plate
Cut pieces of food to fit the feed tube. Fill the tube almost to the
top and push down using the pusher with an even pressure
whilst the machine is running.
Longer shreds can be obtained by stacking pieces horizontally in
the feed tube eg carrot.
slicing plate
If necessary cut food to fit the feed tube. Core foods such as
apples and peppers. Pack the food in an upright position in the
feed tube. The height should be slightly shorter than the feed
tube. Using the pusher, push down with an even pressure whilst
the machine is running.
hints
Use fresh ingredients.
G
Don't cut food up too small. Fill the feed tube fairly full, this
G
prevents food from slipping sideways during processing.
When slicing or shredding: food placed upright comes out
G
shorter than food placed horizontally.
After using a cutting plate there will always be a small amount of
G
waste on the plate or in the food.
Do not allow food to build up to the underside of the plate -
G
empty regularly.
Push food down the feed tube using an even pressure.
G
maxi blend canopy
When blending, use the maxi blend canopy in conjunction with
the knife blade. It allows you to increase the liquid processing
capacity of the bowl and improve the chopping performance of
the blade.
1 Place the canopy into the bowl over the knife blade - do not
push down .
2 Fit the lid .

citrus press

The citrus press is used to juice citrus fruit ie oranges, lemons,
limes and grapefruits.
1 Fit the bowl onto the processor. Add the strainer and turn
clockwise until the fin on the strainer aligns with the mark on the
processor body .
2 Attach the cone onto the drive shaft turning until it drops all the
way down .
3 Cut the fruit in half. Switch on and press the fruit onto the cone.
care & cleaning
Always switch off and unplug before cleaning.
G
Handle blades and cutting plates with care - they are extremely
G
sharp.
Some foods may discolour the plastic. This is perfectly normal
G
and won't harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
Wipe with a damp cloth, then dry. Ensure that the interlock area
G
is clear of food debris.
Don't immerse the power unit in water.
G
Wrap excess cord around the bracket at the back of the
G
appliance.
all other parts
Wash by hand, then dry.
G
Alternatively they can be washed on the top rack of your
G
dishwasher. A short low temperature programme is
recommended.
service & customer care
If the cord is damaged it must, for safety reasons, be replaced
G
by KENWOOD or an authorised KENWOOD repairer.
If you need help with:
using your appliance or
G
servicing, spare parts or repairs
G
Contact the shop where you purchased your appliance.
Designed and engineered by Kenwood in the UK.
G
Made in China.
G
IMPORTANT INFORMATION FOR CORRECT DISPOSAL
OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as
urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving
from inappropriate disposal and enables the constituent materials
to be recovered to obtain significant savings in energy and
resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin.
4