Surround Function; Applying Surround Effects - Sony TAD-M30 Operating Instructions Manual

Surround
Function
This processing amplifier incorporates
several pre-programmed "Digital
Cinema Sound" surround modes.
Select the desired surround mode and
adjust for the room conditions to
enjoy powerful surround effects from
a wide variety of software.

Applying Surround Effects

You can set surround effects at any time regardless of
whether a DVD is playing or in stop mode.
1 5 4
5
1
Turn on all of the components.
2
If you have connected the processing amplifier to a
stereo system or stereo amplifier, switch the
function of the stereo system or stereo amplifier to
the jack to which the processing amplifier is
connected.
Switch the function to "LD/DVD" for the
DHC-MD717.
3
When playing Dolby Digital DVD software, set the
audio digital output on the DVD player to "Dolby
*
Digital/PCM" .
*
When using components that incorporate a Dolby Digital
(AC-3) decoder, the setting item name differs according to the
DVD player (i.e., "Dolby Digital"). See the instruction manual
supplied with the DVD player for the setting method.
6 8
1
4
6
8
EN
23