Getting Ready To Enjoy Surround Sound; Basic Surround Systoms; Selecting The Speaker Operation Mode; In The Dolby* Pro Logic Function (Ta-E611 Only) - Sony TA-E511 Operating Instructions Manual

Av control amplifier
Table of Contents

Advertisement

skeKylomelelageletate mes 2) (oii 1
Two front and two rear speakers are necessary to enjoy the
surround function.
Location of the rear speaker systems
Front speaker (L)
Front speaker (R)
iclesial
Rear speaker
(L) for
Rear speaker (R) for
surround effect
surround effect
Selecting the Speaker Operation Mode in the Dolby Pro Logic Function (for TA-E611)
Selecting surround modes
DOLBY (Dolby Surround) (TA-E511 only)
Expands sound just like listening to it in a movie theater.
DOLBY PRO LOGIC (TA-E611 only)
TA-E611 incorporates the Dolby Pro Logic Surround
Decoder which has the same functions for playback, such
as movie theaters and gives a theater-like experience In
your listening room, naturally reproducing the audio sound
field.
HALL (Hall Surround)
Provides reverberation effect that is produced in a concert
hall.
SIMULATED (Simulated Surround)
Gives a simulated stereo effect to monaural sound.
To turn on or off the surround mode
Press the SURROUND button.
Note
No sound will be heard from the surround speakers, unless
one of the Surround modes is selected.
One or two center speakers are required in addition to the basic four speakers for the Dolby Pro Logic surround system.
In the DOLBY surround mode, a speaker operation mode can be selected to match your speaker system.
Press PRO LOGIC MODE button to select the appropriate mode:
WIDE mode
NORMAL nore
Front
Center
speaker (L) eenite) spoaker (R)
5eaks
Fron
speske er (L) speaker
—_\ —
ae
1)
Rear speaker (L)
Rear speaker (R)
Rear speaker (L)
PHANTOM mode
Front
Cent
sae (L)
cree (R)
=
o——
5
=
Rear speaker (L)
Rear speaker (R)
16
Front
speaker (R)
=
speaker. The bass sound of the center channel
Rear speaker (R)
3CH. LOGIC meee
ra (U) speakers) speaker (R)
NORMAL mode
When connecting smaller speaker than front
speakers, such as that of TV for a center
is output from the front speakers, as small
speaker cannot produce enough bass.
WIDE mode
When connecting the same size of speaker as
front speakers for a center speaker.
PHANTOM mode
When connecting only front and rear speakers.
The sound of the center channel can be heard
from the front speakers.
3 CH. LOGIC mode
When connecting front speakers and a center
speaker. The sound of the rear channels can be
heard from the front speakers.
Note
The amount of the DBFB effect varies according
to the Dolby Pro Logic mode.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ta-e611

Table of Contents