Getting The Most Out Of Dolby Pro Logic Surround Sound - Sony TA-AV561 Operating Instructions Manual

Pro Logic Surround Sound
CENTER
MODE DOLBY
CENTER REAR
DELAY
T.TONE
BALANCE
UR
Using Sound Fields
Selecting the center mode
The amplifier offers you four center modes:
NORMAL, WIDE, 3 CH, and PHANTOM. Each mode
is designed for a different speaker configuration.
Select the mode that best suits your speaker's system
configuration.
1 Press DOLBY to select the DOLBY PRO LOGIC
sound field.
2 Press CENTER MODE repeatedly until the center
mode you want appears in the display. Select the
center mode by referring to the following chart.
Ifyouhave — _ — Select So that
Front and rear NORMAL The bass sound of the
speakers, and a center channel is
small center output from the front
speaker speakers (because a
small speaker cannot
produce enough
bass).
Front and rear WIDE
speakers, and a
large center
speaker
For "complete"
Dolby Pro Logic
Surround sound.
The sound of the rear
channel is output
from the front
speakers.
Front and center 3CH
speakers, no rear (3 Channel
speaker Logic)
The sound of the
center channel is
output from the front
speakers.
Frontand rear + PHANTOM
speakers, no
center speaker
cer When you use the remote
Press SURROUND MODE repeatedly to select the
DOLBY mode.
You can adjust the speaker's volume or delay time
simply by pressing the buttons on the remote.
(continued)
11