Table of Contents
Advertisement
Connecting the Speakers and the Sub Woofer
Speaker placement
Care should be taken for the following points to obtain
the best possible surround sound.
• Use the highest performance speakers
*
We recommend the SS-T505, etc.
• Place the front speakers symmetrically to the right and
left of the listening position.
• Place the center speaker within the range a in the
illustration below.
1.5 m
L
What cords will I need?
π Speaker cords (3)
These are used to connect the front speakers (L/R) and
the center speaker. If cords are supplied with the
speakers, use the supplied cords.
π Audio cord (monaural, 1)
This is used to connect the sub woofer. If a cord is
supplied with the sub woofer, use the supplied cord.
EN
18
*
possible.
a
R
C
S.W
L
: Front speaker (left)
R
: Front speaker (right)
C
: Center speaker
S.W : Sub woofer
Connecting the speakers
Connect the cords according to the procedure 1 to 5
below to hook up the speakers.
1
Connect the front right (R) speaker.
1 Connect the speaker cord to the SPEAKER (R)
terminals of the same polarity (+/–).
Insert this portion.
2 Pull gently on the speaker cord to make sure it is
connected correctly.
If the speaker cord pulls out, connect it again.
Advertisement
Table of Contents
