Speaker And Sub Woofer Set Up - Sony TAD-M30 Operating Instructions Manual

Digital processing amplifier
Hide thumbs Also See for TAD-M30:
Table of Contents

Advertisement

Speaker and Sub Woofer Set Up

Settings required for surround sound
— SET UP
The speaker set up consists of three items: the connection
status, the rear speaker position and the distance from the
listening position to the speakers. Be sure to follow the
procedure below to set the connection status and the rear
speaker position. If these items are not set correctly, sound
may not come from the speakers.
When you want to obtain more accurate surround effects,
set the distance to the speakers (see page 13).
2
3,8
1
Make sure the SPEAKER SELECTOR switch on the
rear panel of the processing amplifier is set to
"REAR" (or "MD717 ONLY" when using the
DHC-MD717).
2
Turn on the processing amplifier.
The ON-STANDBY indicator above the 1/u button on
the processing amplifier goes off.
3
Press SET UP.
The SET UP button lights and "SPEAKER SETUP"
appears in the display.
4
Set the center speaker connection status.
1 Press CURSOR
V
v
/
repeatedly until "CENTER
*
[LARGE
]" appears in the display.
2 Press CURSOR
B
b
/
to select the center speaker
connection status.
Center speaker connection status
None
Connected
Normal
If the sound is distorted
*
The last setting is stored in the memory, so [SMALL] or
[NO] may appear instead.
EN
12
5
4,5,6,7
6
Setting
NO
LARGE
SMALL
Set the rear speaker connection status.
1 Press CURSOR
V
v
/
repeatedly until "REAR
*
[LARGE
]" appears in the display.
2 Press CURSOR
B
b
/
to select the rear speaker
connection status.
Rear speaker connection status
None
Connected
Normal
If the sound is distorted
*
The last setting is stored in the memory, so [SMALL] or
[NO] may appear instead.
Set the rear speaker position.
1 Press CURSOR
V
v
/
repeatedly until "REAR
*
[SIDE
]" appears in the display.
2 Press CURSOR
B
b
/
to select the rear speaker
position setting with respect to the listening
position.
Rear speaker position
Within range A
Within range B
*
The last setting is stored in the memory, so [BEHIND] may
appear instead.
L
C S.W
LS
A
B
Setting
NO
LARGE
SMALL
Setting
SIDE
BEHIND
R
RS
A

Advertisement

Table of Contents
loading

Table of Contents