Microsd Card Interface; Camera Concept - Nokia RM-506 Service Manual

The EM ASIC SIM1 interface supports both 1.8 V and 3.0 V SIM cards. The SIM interface voltage is first 1.8 V
when the SIM card is inserted, and if the card does not response to the ATR a 3 V interface voltage is used.

MicroSD card interface

The MicroSD card is connected to the engine by an external level shifter with an ESD protection filter. Supplied
voltages:
• VSD: 2.85 V (from level shifter)
• VIO: 1.8 V (from VIO SMPS)
Hot swap is supported, which means that the card may be plugged in/out at any time, without removing the
battery.

Camera concept

Camera concept
Camera subsystem concept
Key Components
Powering
Block diagram
The camera subsystem contains the complete imaging system for the main 5Mpixel camera. The main
features of the Imaging and video baseband subsystem are
• Hardware acceleration for the Image processing
• Support for 5MPixel Main camera
• Support for secondary VGA camera module
• Support for Flash LEDs and its driver from ADI
• DM5001D processor
Page 8 –22
Figure 71 MicroSD card interface
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
RM-505; RM-506
System Module and User Interface
Issue 1