Nokia RM-506 Service Manual page 34

Page 2 –6
MJ-214
MJ-214 is meant for component level troubleshooting.
The jig includes RF interface for Bluetooth, WLAN and GPS. In addition,
it has the following features:
• Provides mechanical interface with the engine module
• Provides galvanic connection to all needed test pads in module
• Multiplexing between USB and FBUS media, controlled by Vusb
• Connector for control unit
• Access for Audio-, MMC, and USB connectors
• Module jig attenuation values:
Band
GSM850 TX
GSM850 RX
EGSM900 TX
EGSM900 RX
GSM1800 TX
GSM1800 RX
GSM1900 TX
GSM1900 RX
WLAN TX
FMTx
WCDMA850 TX
WCDMA850 RX
WCDMA1900 TX
WCDMA1900 RX
RJ-230
The jig is used for soldering and as a rework jig for the system module.
It is made of lead-free rework compatible material.
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Service Tools and Service Concepts
Module jig
F Attenuation
824-849 0.4dB
869-894 0.4dB
880-915 0.4dB
935-960 0.4dB
1710-1785 0.6dB
1805-1880 0.6dB
1850-1910 0.6dB
1930-1990 0.6dB
0.6dB@244
2MHz
25.27dB@1
07.9dBm
with 22nH
824-849 0.4dB
869-894 0.4dB
1850-1910 0.6dB
1930-1990 0.6dB
Soldering jig
RM-505; RM-506
Issue 1