Product Features; Product Specifi Cations; High Elevations; Gas Pressures - Vermont Castings ICFDV40LNTSC Installation And Operating Instructions Manual

PRODUCT FEATURES

PRODUCT SPECIFICATIONS
•
This appliance has been certifi ed for use with either
natural or propane gas. Refer to the appropriate data
plates.
•
This appliance is not for use with solid fuels.
•
The appliance is approved for bedroom or bedsitting
room installations.
•
The appliance must be installed in accordance with local
codes if any. If none exist use the current installation
code. ANSI Z223.1/NFPA 54 in the USA, CSA B149 in
Canada.
•
This appliance is mobile home appr-oved.
•
The appliance must be properly connected to a venting
system.
•
The appliance is not approved for closet or recessed
installations.

HIGH ELEVATIONS

Input ratings are shown in BTU per hour and are certifi ed
without deration for elevations up to 4,500 feet (1,370 m)
above sea level.
For elevations above 4,500 feet (1,370 m) in USA,
installation must be in accordance with the current ANSI
Z223.1/NFPA 54 and/or local codes having jurisdiction.
In Canada, please consult provincial and/or local authori-
ties having jurisdiction for installation at elevations above
4,500 feet (1,370 m).

GAS PRESSURES

Inlet Minimum
Inlet Maximum
Manifold Pressure
GAS SPECIFICATIONS & ORIFICE SIZE
Fuel
Model Type
ICFDV40LNTSC Natural
ICFDV40CNTSC Natural
ICFDV40LNTSC w/
propane conversion
ICFDV40CNTSC w/
propane conversion
20304852
Natural LP
4.5" w.c. 11.0" w.c.
10.5" w.c. 13.0" w.c.
3.5" w.c. 10.0" w.c.
Max. Min.
Input Input
BTU/h BTU/h
39,000 28,000
40,000 30,000
LP 36,000 28,000
LP 35,000 28,500
Figure 1 -
ICFDV Series Fireplace Insert Controls
Orifi ce
Size
3.1mm
3.1mm
#50
#50
ICFDV40 Fireplace Insert
Command
Control Board
Center
Gas
Valve
AC Module
5