Table of Contents
Advertisement
LED
Color / Description
•
•
•
•
4x10G Port Link/
Activity LED
•
•
•
•
Module/Location
LED
•
•
•
Figure 29. 1/10GbE SFP+ Port LEDs
1.
24 1/10GbE SFP+ ports with Link/Activity LEDs (up and down arrows indicate port numbers)
2.
Module LED
Figure 30. 1/10GbE RJ-45 Port LEDs
1.
24 1/10GbE SFP+ ports with Link/Activity Status LEDs (up and down arrows indicate port numbers)
2.
Module LED
Installing the Hardware
Solid amber — 40G link is up but operating at lower speed (less than 40G).
Flashing amber — 40GbE port is transmitting/receiving data at a lower speed
(less than 40G).
Flashing amber (1 second on, 1 second off) — Port beacon used to locate port
Off — No link or interface is disabled.
Solid amber — 10G link is up and operating at 10G speed.
Flashing amber — 4x10G port is transmitting/receiving data at 10G speed.
Flashing amber (1 second on, 1 second off) — Port beacon used to locate port
Off — No power
Solid green — Normal operation
Flashing blue — Beacon LED is being used to locate the module.
Flashing amber — Error condition or reload in progress
41
Advertisement
Table of Contents
