Table of Contents
Advertisement
4.
Installing the Chassis in the ReadyRails
Install two cage nuts (item 2 in Figure 14) in each front post at the desired height of the two thumb
screws on each flange. Lift the chassis and slide it into the rails installed in the rack. Tighten the
thumb screws in the cage nuts to secure the chassis to the rack.
Figure 14. Installing the Chassis with ReadyRails in a Non-Threaded-Hole Rack
Installing ReadyRails: Tooled Method for a Threaded-Hole Rack
To install ReadyRails using a tooled method in a threaded-hole 2- or 4-post rack:
1.
Locate the front rack rails in the Dell ReadyRails kit (items 5 and 6 in Figure 10).
•
For a 2-post rack, take out the left and right rail brackets (items 3 and 4 in Figure 10) and slide
them into the front rails.
•
For a 4-post rack, take out the left and right rear rails (items 7 and 8 in Figure 10) and slide them
into the front rails. (The front and rear parts of a rail may arrive pre-assembled.)
Installing the Hardware
23
Advertisement
Table of Contents
