Table of Contents
Advertisement
To install a rack mount tray in a rack, follow the instructions provided with the tray kit. Decide where you
want to mount the switch in the rack. Position the tray at that height and tighten it to the rack posts using
the screws shipped with the tray (items 1 to 4 in Figure 17).
Figure 17. Example of a Mount Rack Tray in a 4-Post Rack
Attaching the Chassis Ground
After you mount the chassis in a rack, ground the device by attaching a chassis ground as follows:
NOTE: The grounding cable is not shipped with the C9010 base configuration. You must order it
separately.
1.
Locate the chassis ground lug nut and holes on the bottom left side (facing you) of the chassis.
26
Installing the Hardware
Advertisement
Table of Contents
