Switching On - Stihl HSE 42 Instruction Manual

English
1 2
Insert the plug (1) into the extension
N
cord coupling (2).
28
Strain relief (cord retainer)
4
Make a loop (3) in the extension
N
cord.
Pass the loop (3) through the
N
opening (4).
Slip the loop (3) over the hook (5)
N
and pull it tight.
Secure extension cord in position
N
with lock (6) – the lock must snap
into place.
Connect the extension cord plug to
N
a properly installed wall outlet.

Switching On

Make sure you have a secure and
N
balanced footing.
Stand upright – hold the power tool
N
in a relaxed position.
3
5
Make sure the cutting attachment is
N
not touching the ground or any other
6
objects.
Hold the unit with both hands – one
N
hand on the control handle – one
hand on the loop handle.
2
Push the switch lever (1) against
N
the loop handle and hold it there.
Push down the trigger switch
N
lockout (2), depress the trigger
switch (3) and hold them in that
position.
The machine is designed for two-hand
operation, i.e. it will run only when the
operator's hands are on the switch
lever (1) and trigger switch (3).
1
3
HSE 42, HSE 52