MrCool DIY Series User Manual page 5
Hide thumbs
Also See for DIY Series:
- User manual (60 pages) ,
- Installation manual (29 pages) ,
- Setup manual (12 pages)
Advertisement
How to use the buttons
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
be set within a range of
increments.
3. Press the ON/OFFbutton to start the air
2
conditioner.
3
ON/OFF
SILENCE
FP
NOTE
1. In the Auto mode, the air conditioner can logically
TIMER
1
MODE
ON
choose the mode of Cooling, Fan, and Heating
TEMP
by sensing the difference between the actual
TIMER
FAN
ambient room temperature and the setting
OFF
temperature on the remote controller.
SWING DIRECT
SLEEP
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
TURBO
SELF
LED
FOLLOW
CLEAN
ME
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
Ensure the unit is plugged in and power is
available.
1. Press the MODE button to select COOL,
HEAT(cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature.
be set within a range of 62 F~ 86 F in 1 F
increments.
3. Press the FAN button to select the fan speed
2
in four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air
4
ON/OFF
SILENCE
conditioner.
FP
1
TIMER
MODE
ON
NOTE
TEMP
In the FAN mode, the setting temperature is not
3
TIMER
displayed in the remote controller and you are not
FAN
OFF
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
SWING DIRECT
SLEEP
TURBO
SELF
LED
FOLLOW
CLEAN
ME
7 7
For more details visit www.MrCool.com
7 7
Auto operation
O
O
O
62 F~ 86 F in 1 F
Cooling /Heating/Fan operation
The temperature can
O
O
O
How to use the buttons
Dehumidifying operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the
3. Press the ON/OFF button to start the air
2
NOTE
3
ON/OFF
SILENCE
In the Dehumidifying mode, you can not switch the
FP
fan speed. It has already been automatically controlled.
TIMER
1
MODE
ON
TEMP
TIMER
FAN
OFF
SWING DIRECT
SLEEP
TURBO
SELF
LED
FOLLOW
CLEAN
ME
For more details visit www.MrCool.com
desired temperature.
The temperature
O
O
can be set within a range of 62 F~ 86 F in
O
1 F increments.
conditioner.
8 8
Advertisement
