Settings; Phone Settings; General Settings; Standby Mode Settings - Nokia E60 User Manual

10.

Settings

Select Menu Tools > Settings.
>
You can define and modify various settings of your device. Modifying these settings affects the operation of your device across
several applications.
Some settings may be preset for the device or sent to you in a configuration message by your network operator or service
provider. You may not be able to change such settings.
Scroll to the setting that you want to edit, and press the joystick to do the following:
• Switch between two values, such as on or off.
• Select a value from a list.
• Open a text editor to enter a value.
• Open a slider to decrease or increase the value by scrolling left or right.

Phone settings

Select Phone to change the language settings, standby mode settings, and display settings of your device.

General settings

Select General and from the following:
Phone language — Select a language from the list. Changing the device language affects every application in your device.
•
When you change the language, the device restarts.
Writing language — Select a language from the list. Changing the writing language also affects the characters that are
•
available when writing text and the predictive text dictionary that is used.
Predictive text — Select
•
Welcome note / logo — Select
•
an image from the Gallery. The welcome note or image is displayed briefly each time you switch on the device.
Orig. phone settings — Restore the original device settings. To do this, you need your device lock code. After resetting, the
•
device may take a longer time to power on. Documents, contact information, calendar entries, and files are unaffected.

Standby mode settings

Select Standby mode and from the following:
Active standby — Select
•
Left selection key, Right selection key
•
screen. Press joystick, select a function from the list, and OK.
Navigation key right, Navigation key
•
open when you scroll to different directions. These settings are not available if you select

Display settings

Select Display and from the following:
Light sensor — Adjust the amount of light required to illuminate the device display.
•
Power saver time-out — Select the amount of time before the screen saver is activated. Activating the screen saver lengthens
•
the device operating time.
Light time-out — Set how quickly after last keypress the display dims.
•

Call settings

Select Call and from the following:
Send my caller ID — Select
•
to determine whether your caller ID is sent.
Send my net call ID — Set this feature on if you want to display your net caller ID to the person you are calling.
•
Call waiting — Select Activate
•
if the function is active on the network.
Internet call waiting — Activate this feature to be notified of a new incoming call while you have a net call in progress.
•
Internet call alert — Set this on if you want the device to respond to the caller that it is busy. If you set this off, the device
•
emits a busy tone to the caller and you receive a notification about the missed call.
Default call type — Select
•
address.
Copyright © 2006 Nokia. All Rights Reserved.
On to use predictive text input. The predictive text dictionary is not available for all languages.
Default to use the default image,
On to have shortcuts to different applications available in the active standby mode.
— Change the shortcuts that open from the left and right selection keys in the standby
left, Navigat. key
Yes to display your phone number to the person you are calling or
to be notified of a new incoming call while you have a call in progress or
Cellular to make normal calls to the phone number or
Text to enter a welcome note of your own, or
down, Navigation key up,
67
Selection key — Change the shortcuts that
Active standby
Set by network
Check status
Internet to use VoIP to call the number or
Image to select
> On.
to let the network
to check