Predictive Text Input; Copy Text To The Clipboard; Change Writing Language; Memory - Nokia E60 User Manual

G e t s t a r t e d
• To insert a number, press and hold the number key.
• To switch between letter and number mode, press and hold #.
• If the next letter is located on the same key as the present one, wait until the cursor appears, and enter the letter.
• To erase a character, press the clear key. Press and hold the clear key to clear more than one character.
• To access the most common punctuation marks, press the 1 key. Press 1 repeatedly to reach the desired punctuation mark.
Press * to open a list of special characters. Use the joystick to move through the list, and select a character.
• To insert a space, press 0. To move the cursor to the next line, press 0 three times.
• To switch between the different character cases, press #.

Predictive text input

1. To activate predictive text input, press the edit key, and select
editors in the device. The indicator
text input.
2. To write the desired word, press 2–9. Press each key only once for one letter.
3. When you have finished writing the word and it is correct, to confirm it, scroll right, or press 0 to add a space.
If the word is not correct, press * repeatedly to view the matching words the dictionary has found one by one.
If the ? character is shown after the word, the word you intended to write is not in the dictionary. To add a word to the
dictionary, select Spell, enter the word (up to 32 letters) using traditional text input, and select OK. The word is added to the
dictionary. When the dictionary is full, a new word replaces the oldest added word.
4. Start writing the next word.
Tip: To set predictive text input on or off, press # twice quickly.
Write the first half of a compound word; to confirm it, scroll right. Write the last part of the compound word. To complete the
compound word, press 0 to add a space.
To turn predictive text input off for all editors in the device, press the edit key, and select

Copy text to the clipboard

1. To select letters and words, press and hold the edit key. At the same time, scroll in the direction necessary to highlight the
word, phrase, or line of text you want to copy. As the selection moves, the text is highlighted.
2. To copy the text to the clipboard, while still holding the edit key, select Copy. To insert the text into a document, press and
hold the edit key, and select Paste.

Change writing language

If you are writing text, for example a note or a message, you can change the writing language. When you are writing and press
a key several times to reach a specific character, changing the writing language gives you access to a different characters.
For example, if you are writing text using a non-Latin alphabet and want to write Latin characters for Web addresses, select
Options Writing language
>

Memory

There are two types of memory into which you can save data or install applications: device memory and removable memory.

Removable memory

Removable memory is data storage that is not built into your device, such as a SIM card or a memory card. A SIM card stores
different information, such as information about the network operator and contacts. A memory card serves as external storage
media for software applications, pictures, music, contacts, text, or any other form of electronic data. High-capacity memory
cards are available.

Device memory

Memory that is built into your device is a dynamic memory pool shared by many applications. The amount of internal memory
available varies but cannot be increased past the maximum factory setting. Data stored on the device, such as software
applications, pictures, and music, consume on-device memory.

Monitor device memory

Select Menu Options
> >
Copyright © 2006 Nokia. All Rights Reserved.
is shown on the top right of the display when you are writing text using predictive
and the writing language to have access to a language that uses Latin characters.
Memory details.
Predictive text on. This activates predictive text input for all
14
Predictive text > Off.