Create A Channel; Register Ptt Channels; Join A Channel; Push To Talk Log - Nokia E60 User Manual

M a k e c a l l s

Create a channel

A channel is like a chat room: you can call the channel to see if anyone is online. The channel call does not alert the other
participants; the participants just join the channel and start speaking with each other.
To create a channel, select
Select Options and define the following:
Channel name — Write the channel name.
•
Channel privacy — Select
•
Nickname in channel
•
Channel thumbnail — Insert a picture that describes the channel.
•
To delete a channel, press the clear key.
When you log in to push to talk, push to talk automatically connects to the channels that were active when the application was
last closed.

Register PTT channels

To register a channel to the push to talk service, select
To edit the channel details, select

Join a channel

To join a channel, select Options
hold the device in front of you during a push to talk call so you can see the display. The display informs you when it is your turn
to speak. Speak towards the microphone, and do not cover the loudspeaker with your hands. Press and hold the voice key the
entire time you are talking. When you have finished talking, release the key.
To switch between channels during multiple calls, select Swap. The active channel is highlighted.
To view the currently active participants in the channel, select
To invite a participant to a channel, select

Push to talk log

To open the push to talk log, select
talk calls.
Tip: To initiate a one-to-one call from

Exit push to talk

Select Options > Exit. Select
background.

Net calls

Your device supports voice calls over the Internet (Internet calls). Your device attempts emergency calls primarily over cellular
networks. If an emergency call using cellular networks is not successful, then your device attempts an emergency call through
your Internet call provider. Due to the established nature of cellular telephony, you should use cellular networks for emergency
calls, if possible. If you have cellular network coverage available, please make sure that your cellular phone is switched on and
ready to make calls before you attempt an emergency call. The capability for an emergency call using Internet telephony depends
on the availability of a WLAN network and your Internet call provider's implementation of emergency call capabilities. Contact
your Internet call provider to check the Internet telephony emergency call capability
VoIP (voice over Internet protocol) technology is a set of protocols that facilitate phone calls over an IP network, such as the
Internet. VoIP phone calls can be established between computers, between mobile phones, and between a VoIP device and a
traditional telephone. To make or receive a VoIP call, your device must be within WLAN coverage, for example.
Before you can make net calls, you need to create a net telephone profile. When the profile is ready, you can make a net call
from all applications where you can create a regular voice call. To make a net call to an address that does not start with a digit,
press any number key when the device is in standby mode, then press # for a few seconds to clear the display and to switch
the device from number mode to letter mode. Write the address and press the call key.
You must define session initiation protocols (SIP) settings in
settings in Menu Tools
>
more information and correct settings.
Copyright © 2006 Nokia. All Rights Reserved.
Options New channel
>
Private or Public.
— Enter your nickname (20 characters maximum) that is displayed to other users.
Options > Edit.
PTT channels. Select the channel you want to talk to, and press the voice key. Remember to
>
Options
Options PTT
>
PTT
Yes to log out and close the service. Press
Settings Call and Menu
> >
Create new.
>
Options > Register.
Options Active
>
Send invitation.
>
log. The log shows the date, time, duration, and other details of your push to
log, select the desired log event and press the voice key.
No if you want to keep the application active on the
Menu Tools
>
Tools Settings Call
> > >
23
members.
Settings Connection
> > >
> Connection. Contact your service provider for
SIP settings and VoIP