Remote Control; Cleaning The Remote Control; Changing The Battery - Miele DA 2906 Operating And Installation Instructions

Cleaning and care

Remote control

Cleaning the remote control

 Only clean the surface with a damp
cloth. Do not use too much water to
avoid moisture penetrating the
casing.

Changing the battery

Use only the type of battery listed.
Do not use rechargeable batteries.
The remote control requires one 3 V CR
2032 battery.
The battery must be changed if
rangehood functions can no longer be
selected using the remote control or if
the LED light on the remote control
does not light up, or only lights up
dimly when a control is pressed.
Rangehood functions can still be
selected using the rangehood controls.
32
 Use a screwdriver to loosen the two
screws on the back and remove the
cover.
 Remove the old battery and replace
with a new one, making sure the
polarity is correct.
 Refit the cover.
 Dispose of the old battery
responsibly.