Power Management - Miele DA 2906 Operating And Installation Instructions

Power management

The rangehood features a Power
management system to help save
energy. The fan power setting is
reduced and the lighting is switched off
automatically.
– If the Intensive setting is selected,
the fan automatically switches to
setting 3 after 5 minutes.
– From settings 3, 2 or 1 the power will
be reduced by one setting after 2
hours and then in 30-minute stages
until the fan finally switches off.
– The cooktop lighting will switch off
automatically after 12 hours.
You can deactivate Power
management.
This can only be done via the control
panel on the rangehood. It cannot be
deactivated using the remote control.
Deactivating Power management can
result in increased electricity
consumption.
Switching power management on/off
You can deactivate Power
management.
This can, however, result in increased
electricity consumption.
 Switch off the fan and the lighting.
 Press the run-on control 515 for
approx. 10 seconds, until the 1 lights
up.
 Then press in turn,
– the lighting control ,
– then the "" touch control, and
– the lighting control  again.
Operation (manual mode)
If Power management is switched on,
the 1 and IS indicators will light up
constantly.
If it is switched off, 1 and IS will flash.
 Press "" to switch Power
management off.
The 1 and IS indicators will flash.
 To switch it on, press "".
The 1 and IS indicators will light up
constantly.
 Confirm the setting by pressing the
run-on control 5 15.
All the indicator lights will go out.
If you don't confirm your selection
within 4 minutes, the rangehood will
automatically revert to the previous
setting.
23