Charcoal Filters; Reading The Filter Operating Hours Counter - Miele DA 2906 Operating And Installation Instructions

Activating and altering the operating
hours counter for the NoSmell active

charcoal filters

Charcoal filters are needed for
recirculation mode.
The operating hours counter for the
charcoal filters needs to be activated
once and the operating hours counter
needs to be set to suit the kind of
cooking you do:
 Press the On/Off touch control  to
switch the fan off.
 Press the "" symbol and the
operating hours control  at the
same time.
The charcoal filter symbol  and one
of the fan power settings will flash.
Fan power setting indicators 1 to IS
show the time set:
1............................................. 120 hours
2............................................. 180 hours
3............................................. 240 hours
IS ........................................ Deactivated
 Press the "" symbol for a shorter
operating time, or the "" symbol to
select a longer operating time.
 Confirm the selection by pressing the
operating hours control .
All the indicator lights will go out.
If you don't confirm your selection
within 4 minutes, the rangehood will
automatically revert to the previous
setting.
Operation (automatic and manual modes)
Reading the filter operating hours
counter
To check the percentage of time set
already used:
 Press the On/Off touch control  to
switch the fan on.
 Press and hold the operating hours
control :
– Once, to read the grease filter
operating hours. The grease filter
symbol  lights up.
– Twice, to read the charcoal filter
operating hours. The charcoal filter
symbol  lights up.
One or more of the fan power setting
indicators will flash.
The number of flashing controls
indicates the percentage of the
operating time which has already been
used up.
Indicator 1 .................................... 25 %
Indicators 1 and 2 ........................ 50 %
Indicators 1 to 3 ........................... 75 %
Indicators 1 to IS ........................ 100 %
The number of operating hours used
remains in the memory even when the
appliance is switched off or there is a
power interruption.
25