Sensor Control Audible Tones - Miele DA 5000 D Operating And Installation Instructions

Operation
Altering the grease filter operating
hours counter
You can set the operating hours
counter to suit the type of cooking you
do.
The operating hours counter is set at
the factory for 30 hours.
Select a shorter time of 20 hours if you
fry a lot.
If you only cook occasionally, we still
recommend 20 hours, because grease
which has built up gradually over a long
period of time will harden on the grease
filters and make cleaning more difficult.
If you use very little fat for cooking,
select a longer time.
To alter the operating time:
^ Touch the s sensor to switch the fan
off.
^ Touch the "5m15" and l sensors at
the same time.
The l and one of the "1" to "4" sensors
will flash.
The "1" to "4" sensors indicate the time
which has been set:
Sensor "1" = 20 hours
Sensor "2" = 30 hours
Sensor "3" = 40 hours
Sensor "4" = 50 hours
16
^ Touch the "1" sensor to select a
shorter time and the "4" sensor to
select a longer time, until the time
required has been set.
^ Confirm your selection by touching
the l sensor.
All the lamps will go out.
If you do not confirm your selection
within 4 minutes, the cooker hood will
automatically revert to the original
setting.

Sensor control audible tones

When selecting a function with the
sensors, an audible tone will sound
briefly to confirm.
The audible tone can be deactivated.
^ Touch the s sensor to switch the fan
off.
^ Touch the "4" and l sensors at the
same time for approx. 5 seconds until
an audible tone sounds briefly. The
audible tone is now switched off for
all functions.
^ To reactivate the audible tone, repeat
the above process.
After the cooker hood has been
disconnected from the mains electricity
supply or after a power cut, the audible
tone is activated regardless of the last
setting.