Download  Print this page

Advertisement

-
A short power-supply cord should be used to reduce the risk
resulting from becoming entangled in or tripping over a longer cord.
Extension cords are available and may be used if care is exercised in
their use. If an extension cord is used, the marked electrical rating of
the cord set or extension cord should be at least as great as the
electrical rating of the appliance, and the cord should be arranged so
that it will not drape over the countertop or tabletop where it can
be pulled on by children or tripped over unintentionally.
-
Do not operate any appliance with a damaged cord or plug or after
the appliance malfunctions, or has been damaged in any manner.
Return appliance to the nearest authorized service facility for
examination, repair or adjustment.
-
The use of accessory attachments not recommended by the
appliance manufacturer may cause injuries.
-
Do not place the appliance on or near a hot gas or electric burner, or
in a heated oven.
-
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
-
Close supervision is necessary when any appliance is used by or near
children.
-
Keep the appliance and its cord out of reach of children.
-
Do not preheat the appliance.
-
Always place a fully assembled bottle with cap in the baby bottle
warmer before you add water.
-
Make sure you add water before you switch on the baby bottle warmer.
-
Hot water can cause serious burns. Be careful when the baby bottle
warmer contains hot water.
-
Extreme caution must be used when moving an appliance containing
hot oil or other hot liquids.
-
Do not touch hot surfaces. Use handles or knobs. The accessible
surfaces may become hot during use.
-
Do not move the appliance when it contains hot water.
ENGLISH
7

Advertisement

   Also See for Philips scf356

Comments to this Manuals

Symbols: 0
Latest comments: