Chapters
Table of Contents
Troubleshooting
Subscribe to Our Youtube Channel
Related Manuals for Transcend DrivePro 200
Summary of Contents for Transcend DrivePro 200
- Page 1 User's Manual DrivePro 200 Car Video Recorder (For FW v2.0 or later**) (For FW prior to v2.0**) * Click the image to view the corresponding manual. ** Please go to Settings > Information to check your DrivePro firmware version.
- Page 2 User's Manual DrivePro 200 Car Video Recorder (For FW v2.0 or later)
-
Page 3: Table Of Contents
v2.0 Table of Contents 1. Introduction︱.............................4 2. Package Contents︱......................... 4 3. Features︱............................6 4. System Requirements︱........................6 5. Safety Precautions︱........................7 6. Getting Started︱..........................8 Inserting a microSD Memory Card......................9 Mounting the DrivePro..........................10 Connecting to Power..........................11 Recording Screen............................13 Function Buttons............................ -
Page 4: Introduction
Full HD 1080P to ensure all the important details of your trip are recorded. Videos are saved on a microSD memory card as the vehicle is driven. Your DrivePro comes bundled with a 16GB Transcend microSD memory card, letting you record around 2 hours of Full HD footage without the need to purchase additional storage. - Page 5 v2.0 16GB microSD Memory Card Video Cable Quick Start Guide Warranty Card...
-
Page 6: Features
v2.0 3. Features︱ Smooth, detailed Full HD 1080P recording @ 30fps resolution Bright 2.4-inch color LCD screen 160 degree wide angle lens Bundled 16GB microSD memory card Wi-Fi function lets you operate the DrivePro on your mobile device Hi-Speed USB 2.0 connector for easy computer connectivity and fast file transfers Stream videos on a TV screen via VIDEO OUT port Records videos in .MOV file format Built-in microphone... -
Page 7: Safety Precautions
Do not use the DrivePro in environments with strong magnetic fields or excessive vibration. Only use the Transcend provided car adapter with the DrivePro. Use of other car adapters may cause unknown problems. If your car’s lighter socket continues to provide power after the engine is switched off, unplug the DrivePro when the engine is off or idling to reduce unnecessary power consumption and prevent any unexpected problems. -
Page 8: Getting Started
v2.0 6. Getting Started︱ Wide Angle Lens Built-in Speaker VIDEO OUT Port 2.4” LCD Display Function Buttons LED Indicator Emergency Button Memory Card Slot Bracket Socket USB Connector Built-in Microphone Reset Button... -
Page 9: Inserting A Microsd Memory Card
v2.0 Inserting a microSD Me mory Card You must insert a microSD memory card into the DrivePro before you can start recording. Please use a MLC-based microSD memory card with 8GB, 16GB or 32GB capacity (Class 10 or above). Insert a microSD memory card into its appropriate card slot on the left-hand side of the DrivePro. Note: Always format new memory cards in the DrivePro before using them for the first time. -
Page 10: Mounting The Drivepro
v2.0 Mounting the DrivePro Insert the mounting bracket into the top of the DrivePro and slide sideways until you hear a click. Thoroughly clean and dry the area of the windshield you wish to mount the DrivePro. If possible, mount the DrivePro in the middle of the windshield near the rear-view mirror for the best field of view. -
Page 11: Connecting To Power
v2.0 When the DrivePro is in the best position, turn the adjustment knob clockwise to make sure the DrivePro is securely locked in place. Connecting to Power Note: Insert a microSD memory card before connecting the DrivePro to your car’s lighter socket. - Page 12 v2.0 1. Connect the small end of the car adapter to the USB connector of the DrivePro. 2. Connect the other end of the car adapter to your car’s lighter socket. 3. After the car engine is switched on, the DrivePro will automatically turn on and start recording. Note: Please set up the date and time before first use.
-
Page 13: Recording Screen
v2.0 Recording Screen ① Recording status indicator ② Video resolution ③ Wi-Fi indicator ④ Voice record status ⑤ Battery status ⑥ Date/Time Function Buttons Mode Video Recording Power / Wi-Fi Browse Files Settings Snapshot Browse/Settings Back* Down Video Playback Back* Play/Pause Protected/ Unprotected Delete... -
Page 14: Setting The Date And Time
v2.0 Back* Left Right Delete *Press and hold the Power button for 3 seconds to manually turn on/off the DrivePro in any mode. LED Indicator Reference Chart Wi-Fi Status Definition ● Flashing Recording with Wi-Fi Solid Standby with Wi-Fi ● Flashing Recording Solid... -
Page 15: Recording Videos
v2.0 7. Recording Videos︱ After the car engine is switched on, the DrivePro will automatically turn on and start recording. By default, one video file is saved for every 3 minute of recording. To adjust the recording length, please refer to the Settings section in this manual. After the engine is switched off, the DrivePro will automatically save the current recording and power off. - Page 16 v2.0 A warning will appear on the screen when the emergency recording is being activated. G-Sensor Event Recording: During video recording, the DrivePro will automatically activate Emergency Recording mode when detecting a collision. If the G-Sensor sensitivity is set to “High”, even minor shocks will activate Emergency Recording mode.
-
Page 17: Playing Videos And Browsing Photos
v2.0 8. Playing Videos and Browsing Photos︱ Playing Videos / Browsing Photos 1. During video recording, press the Browse button 2. Use to select Normal, Emergency or Snapshot, and press 3. Use to select the desired file, and press to preview. 4. -
Page 18: Deleting Videos/Photos
v2.0 Deleting Videos/Photos 1. Press to delete video/photo files. 2. Use to cancel or confirm the deletion of the video/photo file, and press Protecting Videos 1. Press to protect the video file. 2. Use to select the desired option and press... -
Page 19: Video Out
v2.0 VIDEO OUT To play recorded files on a TV set: 1. Connect the DrivePro to your TV using the video cable. 2. Press the Settings button on the DrivePro. 3. Use to select Video Out and press 4. Use to select the TV type based on your region (NTSC or PAL) and press 5. - Page 20 v2.0 3. Use to select the desired setting, and press 4. Press to return to the Settings menu. Menu Options Resolution: Set the resolution/quality for video recording. Available options: 1080P 30FPS / 720P 30FPS Exposure Value: Adjust exposure composition value to lighten or darken the preview screen. Available options: +2.0 ~ -2.0 Video Length: Set the recording length of each recorded video file.
- Page 21 Upgrade Firmware: Keep your DrivePro up-to-date with the latest version downloaded from Transcend website http://www.transcend-info.com/Support/service After downloading the firmware from Transcend website, decompress it and put it in the “SYSTEM” folder in the microSD memory card. Insert the microSD memory card that contains the latest firmware version.
- Page 22 1. DrivePro will shut down and the red LED light will flash while the firmware is being upgraded. After the upgrade is complete, the DrivePro will restart automatically. 2. If the DrivePro cannot be turned on due to firmware upgrade failure, please contact Transcend customer service for technical support.
-
Page 23: Using The Drivepro App
v2.0 10. Using the DrivePro App︱ Developed specifically for iOS (iPhone/iPad) and Android devices, the free download DrivePro App allows you to wirelessly view real-time video footages during recording, control DrivePro functions and play videos directly from your mobile devices. Downloading and Installing the App 1. -
Page 24: Drivepro Toolbox™ Software
DrivePro, and see your driving paths of the recorded videos displayed on maps without the need to install separate codecs. 1. Download the installation files from: http://www.transcend-info.com/downloads 2. Install DrivePro Toolbox software on your desktop or laptop. The useful features include: 1. -
Page 25: Transferring Files To A Computer
v2.0 12. Transferring Files to a Computer︱ To transfer files between the DrivePro’s memory card and your computer: Option 1: Take the microSD memory card out of the DrivePro and insert to a compatible card reader to transfer files to your computer. Option 2: Insert the microSD memory card into the DrivePro. - Page 26 v2.0 Removable Disk drive with a newly assigned drive letter representing the DrivePro will automatically appear in My Computer, and a Removable Hardware icon will appear in the Windows System Tray. *Note: (E:) is an example drive letter – the letter in your “My Computer” window may differ. Your DrivePro is now ready to transfer data just like an external hard drive.
- Page 27 v2.0 WARNING! To prevent data loss, always follow the proper removal procedures when disconnecting the DrivePro from your computer. When DrivePro is connected to a computer, it can only be used for transferring files. You will not be able to use any of the DrivePro’s features at this time. Please disconnect your DrivePro from the computer to resume normal function.
-
Page 28: Troubleshooting
DrivePro for repair. If you cannot find any ideal solution to your question below, please consult your dealer, service center, or local Transcend branch office for further help. You can also visit Transcend website for FAQ and Technical Support services. For any Hardware issues, please refer to the DrivePro User’s Manual. - Page 29 v2.0 Please check the automatic network switching function setting in your mobile device system. Please disable the automatic network switching function.
-
Page 30: Specifications
v2.0 14. Specifications︱ Display Type & Size: 2.4" color LCD Connect interface: USB2.0 MLC-based microSD, 8GB / 16GB / 32GB (Class 10 or Storage Capacity: above) Speaker / Microphone: 1.0 Watt / 0.5mA (Built in) Dimensions: 67mm(L) × 72mm(W) × 34.3mm(H) Weight: Power Supply for Car Input DC10V~30V / 1A (Max.) - Page 31 Using TLC-based memory cards on your car video recorder might result in unstable performance. 2. Transcend offers Ultimate microSD card series (633x & Note: 600x) for selection to reach the most stable recording performance in addition to the bundled microSD card.
-
Page 32: Recycling And Environmental Considerations
v2.0 15. Recycling and Environmental Considerations︱ Recycling the Product (WEEE): Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. -
Page 33: Federal Communications Commission (Fcc) Statement
v2.0 16. Federal Communications Commission (FCC) Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation. -
Page 34: Two-Year Limited Warranty
Under special circumstances, Transcend may refund or credit the current value of the product at the time the warranty claim is made. The decision made by Transcend shall be final and binding upon you. Transcend may refuse to provide inspection, repair or replacement service for products that are out of warranty, and will charge fees if these services are provided for out-of-warranty products. -
Page 35: Gnu General Public License ("Gpl") Disclosure
WITHOUT ANY WARRANTY, without even implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. The entire risk as to the quality and performance of the GPL Software is with you. Transcend does not provide any support for the GPL software. - Page 36 (a) This Agreement constitutes the entire agreement between Transcend and Customer concerning the subject matter hereof, and it may only be modified by a written amendment signed by an authorized executive of Transcend. (b) Except to the extent applicable law, if any, provides otherwise, this Agreement will be governed by the law of the Republic of China, excluding its conflict of law provisions.
- Page 37 User's Manual DrivePro 200 Car Video Recorder (For FW prior to v2.0)
- Page 38 v1.5 Table of Contents Introduction︱............................39 Package Contents︱........................... 39 Features︱............................. 41 System Requirements︱........................41 Safety Precautions︱.......................... 41 Getting Started︱..........................42 Inserting a microSD Memory Card......................44 Mounting the DrivePro..........................45 Connecting to Power..........................46 Recording Screen............................47 Function Buttons............................48 Set the Date and Time..........................49 Recording Videos︱..........................
-
Page 39: Introduction
Full HD 1080P to ensure all the important details of your trip are recorded. Videos are saved on a microSD memory card as the vehicle is driven. Your DrivePro comes bundled with a 16GB Transcend microSD memory card, letting you record around 2 hours of Full HD footage without the need to purchase additional storage. - Page 40 v1.5 16GB microSD Memory Card Video Cable Quick Start Guide Warranty Card...
-
Page 41: Features
v1.5 Features︱ Smooth, detailed Full HD 1080P recording @ 30fps resolution Bright 2.4-inch color LCD screen 160 degree wide angle lens Bundled 16GB microSD memory card Wi-Fi function lets you operate the DrivePro on your mobile device Hi-Speed USB 2.0 connector for easy computer connectivity and fast file transfers Stream videos on a TV screen via VIDEO OUT port Records videos in .MOV file format with 15Mbps high video bit rate Built-in microphone... -
Page 42: Safety Precautions
Do not use the DrivePro in environments with strong magnetic fields or excessive vibration. Only use the Transcend provided car adapter with the DrivePro. Use of other car adapters may cause unknown problems. If your car’s lighter socket continues to provide power after the engine is switched off, unplug the DrivePro when the engine is off or idling to reduce unnecessary power consumption and prevent any unexpected problems. -
Page 43: Getting Started
v1.5 Getting Started︱ Wide Angle Lens Built-in Speaker VIDEO OUT Port 2.4” LCD Display Function Buttons LED Indicator Emergency Button Memory Card Slot Bracket Socket USB Connector Built-in Microphone Reset Button... -
Page 44: Inserting A Microsd Memory Card
v1.5 Inserting a microSD Me mory Card You must insert a microSD memory card into the DrivePro before you can start recording. Please use a MLC-based microSD memory card with 8GB, 16GB or 32GB capacity (Class 10 or above). Insert a microSD memory card into its appropriate card slot on the left-hand side of the DrivePro. Note: Always format new memory cards in the DrivePro before using them for the first time. -
Page 45: Mounting The Drivepro
v1.5 Mounting the DrivePro Insert the mounting bracket into the top of the DrivePro and slide sideways until you hear a click. Thoroughly clean and dry the area of the windshield you wish to mount the DrivePro. If possible, mount the DrivePro in the middle of the windshield near the rear-view mirror for the best field of view. -
Page 46: Connecting To Power
v1.5 Connecting to Power Note: Insert a microSD memory card before connecting the DrivePro to your car’s lighter socket. 1. Connect the small end of the car adapter to the USB connector of the DrivePro. 2. Connect the other end of the car adapter to your car’s lighter socket. -
Page 47: Recording Screen
v1.5 3. After starting your car, the DrivePro will automatically turn on and start recording. 4. After the engine is switched off, the DrivePro will automatically save the current recording and power off. Note: On some cars, the lighter socket continues to provide power after the engine is switched off. If this happens, unplug the DrivePro when the engine is off or idling to reduce unnecessary power consumption and prevent any unexpected problems. -
Page 48: Function Buttons
v1.5 Function Buttons Mode Video Recording Power On/Off Browse Files Settings Wi-Fi On/Off Browse/Settings Back* Down Video Playback Back* Delete Protect Play/Pause *Press and hold for 3 seconds to turn on/off the DrivePro in any mode. Emergency Recording During video recording, press the emergency button on the left-hand side of the DrivePro to manually activate emergency recording mode. -
Page 49: Set The Date And Time
v1.5 LED Indicator Reference Chart LED Status Definition Solid Red Standby (Wi-Fi Off) Flashing Red Recording (Wi-Fi Off) Solid Blue Standby (Wi-Fi On) Flashing Blue Recording (Wi-Fi On) Set the Date and Time To set the current date and time: During video recording, press the Settings button to select Date/Time Settings and press to adjust the value and press... -
Page 50: Recording Videos
v1.5 Recording Videos︱ After starting your car, the DrivePro will turn on and start recording automatically. By default, one video file is saved for every 1 minute of recording. To adjust the recording length, please see the Settings section of this manual. After the engine is switched off, the DrivePro will automatically save the current recording and power off. - Page 51 v1.5 DrivePro to manually activate emergency recording mode. The emergency icon will appear on the screen when activated. G-Sensor event recording: During video recording, if the DrivePro detects an impact, it will automatically activate emergency recording mode. If the G-Sensor sensitivity is set to “High”, even minor shocks will be detected. ...
-
Page 52: Browse And Playback Videos
v1.5 Browse and Playback Videos︱ Playing Videos 1. During video recording, press the Browse button 2. Use to select either Video Files or Protected Files and press 3. Use to select the desired video file and press 4. Press to pause playback. Press again to resume playback. -
Page 53: Deleting Videos
v1.5 Deleting Videos 1. During playback of a video file, press . The message “Are you sure you want to delete this file?” will appear. 2. Use to select “Yes” and press to delete the file. Protecting Videos 1. During playback of a normal video file, press . -
Page 54: Settings
v1.5 1. Press the Settings button on the DrivePro. 2. Use to select Video Out and press 3. Use to select Disable and press 4. Remove the video cable from your TV and the DrivePro. Settings︱ In the Settings menu, you can adjust settings such as video resolution, recording time, and G-Sensor sensitivity. - Page 55 v1.5 Video Length: Set the recording length of each recorded video file. Available options: 1 min / 3 mins / 5 mins Time Stamp: Adds the current time of the event to the video being recorded. Available options: Enable / Disable Voice Recording: Turn on/off microphone during video recording.
- Page 56 WARNING: NEVER remove the power cord or the microSD memory card while the firmware is being upgraded. If firmware upgrade fails and the DrivePro will not turn on, please contact Transcend customer support. Restore Defaults: Reset all settings to factory default settings.
-
Page 57: Transfer Files To A Computer
v1.5 Transfer Files to a Computer︱ To transfer files between the DrivePro’s memory card and your computer: Option 1: Take the microSD memory card out of the DrivePro and use a compatible card reader to transfer files to your computer. Option 2: Insert the memory card into the DrivePro. - Page 58 v1.5 *Note: (I:) is an example drive letter – the letter in your “My Computer” window may differ. Your DrivePro is now ready to transfer data just like an external hard drive. To transfer videos, simply drag-and-drop files from the folder that represents the DrivePro. Proper removal of your DrivePro (from Windows): Click once on the Removable Hardware icon in the system tray.
- Page 59 v1.5 WARNING! To prevent data loss, always follow the proper removal procedures when disconnecting the DrivePro from your computer. When DrivePro is connected to a computer, it can only be used for transferring files. You will not be able to use any of the DrivePro’s features at this time. Please disconnect your DrivePro from the computer to resume normal function.
-
Page 60: Troubleshooting
DrivePro for repair. If you are unable to remedy a problem from the following hints, please consult your dealer, service center, or local Transcend branch office. We also have FAQ and Support services on our website. For any Hardware issues please consult the DrivePro User’s Manual. - Page 61 v1.5 How many devices can connect to my DrivePro simultaneously? Only one device can wirelessly connect to your DrivePro at a time. Why my android device shows “Unstable internet connection” and cannot connect to DP200 when the WiFi turns on? Please check the automatic network switching function setting in your mobile device system.
-
Page 62: Specifications
v1.5 Specifications︱ Display Type & Size: 2.4" color LCD Connect interface: USB2.0 MLC-based microSD, 8GB / 16GB / 32GB (Class 10 or Storage Capacity: above) Speaker / Microphone: 1.0 Watt / 0.5mA (Built in) Dimensions: 67mm(L) × 72mm(W) × 34.3mm(H) Weight: Power Supply for Car Input DC10V~30V / 1A (Max.) - Page 63 Using TLC-based memory cards on your car video recorder might result in unstable performance. 2. Transcend offers Ultimate microSD card series (633x & Note: 600x) for selection to reach the most stable recording performance in addition to the bundled microSD card.
-
Page 64: Recycling And Environmental Considerations
v1.5 Recycling and Environmental Considerations︱ Recycling the Product (WEEE): Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. -
Page 65: Federal Communications Commission (Fcc) Statement
v1.5 Federal Communications Commission (FCC) Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation. This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. -
Page 66: Two-Year Limited Warranty
Under special circumstances, Transcend may refund or credit the current value of the product at the time the warranty claim is made. The decision made by Transcend shall be final and binding upon you. Transcend may refuse to provide inspection, repair or replacement service for products that are out of warranty, and will charge fees if these services are provided for out-of-warranty products. -
Page 67: Gnu General Public License ("Gpl") Disclosure
WITHOUT ANY WARRANTY, without even implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. The entire risk as to the quality and performance of the GPL Software is with you. Transcend does not provide any support for the GPL software. - Page 68 (a) This Agreement constitutes the entire agreement between Transcend and Customer concerning the subject matter hereof, and it may only be modified by a written amendment signed by an authorized executive of Transcend. (b) Except to the extent applicable law, if any, provides otherwise, this Agreement will be governed by the law of the Republic of China, excluding its conflict of law provisions.
- Page 69 (e) Transcend may assign its rights under this Agreement without condition. (f) This Agreement will be binding upon and will inure to the benefit of the parties, their successors and permitted assigns.
Need help?
Do you have a question about the DrivePro 200 and is the answer not in the manual?
Questions and answers
Do I need to set the current day and time every day?
No, you do not need to set the current day and time daily on the Transcend DrivePro 200. The time is saved through an internal battery.
This answer is automatically generated