Dimensions; Torque Requirements; Operation Instructions; Controls - Exmark LAZER Z ADVANTAGE SERIES Operator's Manual

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983

2.10 DIMENSIONS

2.10.1
2.10.2 Overall Length:
2.10.3 Overall Height:
2.10.4
2.10.5
2.10.6 Curb Weight:

2.11 TORQUE REQUIREMENTS

Bolt Location
Cutter Housing Spindle Nut (secured with threadlocker) 140-145 ft-lbs. (190-197 N-m)
Blade Mounting Bolt...........................................................55-60 ft-lbs. (75-81 N-m)
Engine Deck/Front Frame Mount Bolts ..............................30-35 ft-lbs. (41-47 N-m)
Anti-Scalp Roller Nuts........................................................40-45 ft-lbs. (54-61 N-m)
Engine Mounting Bolts ......................................................30-35 ft-lbs. (41-47 N-m)
Wheel Lug Nuts .............................................................90-95 ft-lbs. (122-129 N-m)
Wheel Motor Mounting Bolts............................................72-77 ft-lbs. (98-104 N-m)
Wheel Hub Slotted Nut ..............................................minimum125 ft-lbs. (169 N-m)
Rollover Protection System (Roll Bar) Mounting Bolts .......30-35 ft-lbs. (41-47 N-m)
Deck Drive Jackshaft Nut ..............................................75-80 ft-lbs. (102-108 N-m)
Clutch Retaining Bolt (secured with threadlocker)..............55-60 ft-lbs. (75-81 N-m)

3. OPERATION INSTRUCTIONS

3.1 CONTROLS

3.1.1
3.1.2
Overall Width:
without deck
w/52" Deck 49.8 in. (126.5 cm)
w/60" Deck 53.8 in. (136.7 cm)
w/52" Deck
Roll Bar - Up 78.2 in. (198.7 cm)
Roll Bar - Down 88.9 in. (225.8 cm)
Roll Bar - Up
71.4 in. (181.4 cm)
Tread Width: (center to center of tires, widthwise)
w/52" Deck
Drive wheels 39.7 in. (100.1 cm) 43.7 in. (111.0 cm)
Caster wheels 37.0 in. (93.9 cm)
Wheel Base: (center of caster tire to center of drive tire)
w/52" Deck
1085 lbs. (492 kg)
Familiarize yourself with all controls before operating the mower.
Motion Control Levers: Located on each side of the console. The left lever
controls the flow of hydraulic oil from the left hydrostatic pump to the left drive
wheel motor. The right lever controls the flow of hydraulic oil from the right
hydrostatic pump to the right drive wheel motor.
IMPORTANT: To begin movement (forward or backward) the operator must
be in the seat, the brake lever must be disengaged (pushed down) before
the motion control levers can be moved in or the engine will kill.
When levers are centered in the T-slot the drive system is in the neutral position.
With levers moved out in the T-slot the drive system is in the neutral lock position
(See Figure 2).
www.mymowerparts.com
deflector up
53.4 in. (135.6 cm)
61.4 in. (156.0 cm)
w/60" Deck
78.2 in. (198.7 cm)
88.9 in. (225.8 cm)
Roll Bar - Down
53.3 in. (135.4 cm)
w/60" Deck
39.0 in. (99.1 cm)
w/52" & 60" Decks
50.3 in. (127.8 cm)
w/60" Deck
1126 lbs. (511 kg)
- 13 -
deflector down
64.2 in. (163.1 cm)
72.2 in. (183.4 cm)
Torque