Konica Minolta bizhub PRESS 1052 User Manual page 158

8.2 Print a job in the Secure Folder
[Proof (1st Sheet)]
[Proof]
[Wait]
[Auto]
[Suspended]
[Print]
6
When [Auto] is selected, a screen to specify the number of copies appears. Enter a number with the
keypad, and then press [OK].
% By pressing [Change Output Sheet], you can choose printing pages between all pages and a spec-
ified page or specified pages.
To print all pages, press [All Sheets].
To print a specified page or specified pages, press [Sheet Specify] and then specify with a page
number or page numbers.
The selected file is printed.
7
A screen appears and asks you if you wish to continue the printing operation. Press [Yes] to continue,
or press [No] to end.
% When you press [Yes], repeat the procedure from step 5.
bizhub PRESS 1250/1052
Prints the first page only, stops, and then displays the [Mode Check]
screen to check or change the print settings.
If it is unnecessary to change the print settings, press the [Start] but-
ton to restart printing.
To see the operation flow, refer to page 4-27.
When printing multiple copies, prints one copy, stops, and then dis-
plays the [Mode Check] screen to check or change the print settings.
If it is unnecessary to change the print settings, press the [Start] but-
ton to restart printing.
To see the operation flow, refer to page 4-27.
Stops after RECALL and a screen is displayed to confirm settings.
Settings can be changed.
To see the operation flow, refer to page 4-27.
When this button is selected, printing starts without pressing the
[Start] button.
To see the operation flow, refer to page 4-27.
When this button is selected, job moves to [Suspend] in the [Job
List] screen.
To see the operation flow, refer to page 4-27.
Prints the selected file.
8
8-8