7.4
Transmission to the FTP Server
When an FTP server is Input Manually
1
Follow the Step 1 to 2 of "When an FTP server is Already Registered" (p. 7-14).
2
Press [Input Address].
% Configure [Port No.] and [Firewall] when necessary.
% If you want to select the registered address, refer to page 7-14.
3
Press [Register Name] to enter the Register Name.
% The Name is automatically inputted in [Reference Name]. If you want to change the Register Name,
press [Reference Name] and input the name again.
bizhub PRESS 1250/1052
7
7-16