Konica Minolta bizhub PRESS 1052 User Manual page 120

7.4 Transmission to the FTP Server
% Configure [Port No.] and [Firewall] when necessary.
% The selected destination is displayed in [List] at the left side of the screen.
% You can refine the registered address by the search function. For details, refer to page 3-7.
% You can refine the Address by using [A to Z]. For more information on how to use [A to Z], refer to
page 7-2.
% To deselect the address, press the selected address again.
% When entering an address manually, refer to page 7-16.
4
Press [Scan Settings].
5
Configure the necessary items.
% For more information on the configurations on the Scan Setting screen, refer to page 7-35.
% Press [File Name] if you want to specify the file name.
6
Set an original, and then press [Start].
The original is scanned, and the scanned data is stored in the specified destination.
% To return to the screen to specify destinations, press [Address].
% Settings on the scan setting screen and the selection on the destination screen may remain till the
machine is restarted. It is recommended to clear the settings ans the selection after the operation.
To clear the settings, press [Reset] in the scan setting screen. To clear the selection, return to the
destination screen by pressing [Address] and then press [Clear All], or press [Reset] on the control
panel.
bizhub PRESS 1250/1052
7
7-15