Replacing The Base Frame; Procedure; Post-Requisites - Dell Edge Gateway 5100 Service Manual

Replacing the base frame

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Place the base frame on the bottom cover.
2 Connect the Dip Switch board cable and status-light board cable to the
system board
3 Route the wireless card cables and mobile broadband card cables
through the routing guides.
4 Replace the system grounding port screw.
5 Turn the system over.
6 Replace the screws that secures the bottom cover to the base frame.
7 Turn the system right side up.

Post-requisites

1 Replace the mobile broadband
2 Replace the wireless
3 Replace the top
computer. After working inside your
card.
card.
cover.
After working inside your
33