For More Information - Dell UltraSharpUP3216Q User Manual

Activate the computer and wake up the monitor to gain access to the OSD.
If you press any button other than the power button, one of the following
messages will appear depending on the selected input:
Dell UltraSharp UP3216Q
There is no signal coming from your computer. Press any key on the
keyboard or move the mouse to wake it up. If there is no display, press the
monitor button now to select the correct input source on the
On-Screen-Display menu.
If either HDMI, DP or mini DP input is selected and the corresponding cable is
not connected, a floating dialog box as shown below appears.
Dell UltraSharp UP3216Q
No HDMI Cable
The display will go into Power Save Mode in 5 minutes.
www.dell.com/support/monitors
or
Dell UltraSharp UP3216Q
No DP Cable
The display will go into Power Save Mode in 5 minutes.
www.dell.com/support/monitors
or
Dell UltraSharp UP3216Q
No mDP Cable
The display will go into Power Save Mode in 5 minutes.
www.dell.com/support/monitors
See Troubleshooting
44  Operating the Monitor

for more information.