Dell UltraSharpUP3216Q User Manual page 35

– CAL1/CAL2: User calibrated preset mode
using Dell Ultrasharp Color Calibration
Software or other Dell approved software.
Dell Ultrasharp Color Calibration Software
works with the X-rite colorimeter i1Display
Pro. The i1Display Pro can be purchased
from the Dell Electronics, Software and
Accessories website.
NOTE: Accuracy of sRGB, Adobe RGB, DCI-P3,
REC709, CAL1 and CAL2 are optimized for RGB
input color format. For optimal color accuracy
of sRGB and Adobe RGB, turn Uniformity
Compensation to Off.
NOTE: Factory Reset will remove all calibrated
data in CAL1 and CAL2.
• Custom Color: Allows you to manually adjust
the color settings. Press the
to adjust the Red, Green, and Blue values and
create your own preset color mode.
Use the and
Offset, Hue, Saturation.
Custom Color
Gain
O set
Hue
Saturation
– Gain: Select it to adjust input RGB signal
gain level (default value are 100).
– Offset: Select it to adjust RGB black-level
offset value (default value are 50) to control
your monitor base color.
– Hue: Select it to adjust RGBCMY hue value
individually (default value are 50).
– Saturation: Select it to adjust RGBCMY
saturation value individually (default value
are 50).
buttons to select the Gain,
Operating the Monitor  35
and buttons