Table of Contents
Advertisement
No.
Item
7
8
Band arm plate assembly,
14
( S3 )
7
( P2 )
( P3 )
( L9 )
Reference picture/drawing
8
Tension arm sub-assembly
( W2 )
8
Fig. 2-7-8(a)
Attaching the spring
Step 1
Hook
(Longer end)
a
Step 2
Hook
b
(Shorter end)
Step 3
Fig. 2-7-8(b)
Procedure
<Removal>
1) Remove the washer (W2).
2) Remove the screw (S3).
3) Remove the spring (P2).
4) Remove the band arm plate assembly and tension
arm sub-assembly.
NOTE
Be careful not to lose the spring (P3).
<Attaching>
1) Attach the spring (P3) to the tension arm sub-
assembly. Engage the longer end of spring to hook
a and the shorter end to hook b as shown in Fig.
2-7-8(b).
2) Attach the tension arm sub-assembly.
3) Attach the band arm plate assembly.
4) Clamp with the screw (S3) and washer (W2).
5) Attach the spring (P2) to (L9).
NOTE
After attaching, ensure that the band arm assem-
bly can rotate in the direction of the arrow as
shown in Fig. 2-7-8(c).
Fig. 2-7-8(c)
6) After attaching, adjust the tension.
2-16
2-17
Advertisement
Table of Contents
