Kyocera FS-6020 Installation Manual page 13

Release Lever
Load Limit Marks
6
Adjust the position of the paper stopper
to the paper size you are going to use,
Paper
pulling up the release lever located on
Stopper
the back of the paper stopper.
7
Make sure that the edges of the paper
are aligned. Slide the paper into the
paper cassette.
8
Put the cassette cover.
• Make sure that the paper you
set fits below the load limit
marks ( ) on the right and
left side paper guides.
• The paper cassette will hold
approximately 250 sheets of
paper with a 80 g/m² (21 lb.)
basis weight, or with a thick-
ness of 0.11 mm.
11